2BZX84C3V0 ... 2BZX84C47 (300 mW) 2BZX84C3V0 ... 2BZX84C47 (300 mW) Surface mount Silicon Planar Dual Zener Diodes Silizium-Planar-Zener-Doppel-Dioden für die Oberflächenmontage Version 2007-06-29 Maximum power dissipation Maximale Verlustleistung 1.1 2.9 ±0.1 0.4 Type Code 1 1.3±0.1 2.5 max 3 300 mW Nominal Z-voltage – Nominale Z-Spannung 3.0...47 V Plastic case Kunststoffgehäuse SOT-23 (TO-236) Weight approx. – Gewicht ca. 2 0.01 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert 1.9 Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Dimensions - Maße [mm] 1 = C1 2 = C2 3 = A1/2 Standard Zener voltage tolerance is graded to the international E 24 (~ ±5%) standard. Other voltage tolerances and higher Zener voltages on request. Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der internationalen Reihe E 24 (~ ±5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage. Maximum ratings and Characteristics Grenz- und Kennwerte Power dissipation – Verlustleistung TA = 25°C Ptot 300 mW 1) Junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj TS -50...+150°C -50...+150°C Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft RthA < 420 K/W 1) Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite Pinning Anschlussbelegung 15 5,1 [mA] 3 4,7 5,6 8,2 6,8 6,2 7,5 10 9,1 10 4,3 1 2 3,9 1 = C1 2 = C2 3 = A1/A2 5 IZ = 5 mA 3,6 3,3 3,0 IZ 0 4 5 7 0 VZ 2 3 6 8 10 [V] Zener Voltage vs. Zener current – Abbruchspannung über Zenerstrom 1 Mounted on P.C. board with 3 mm2 copper pads at each terminal Montage auf Leiterplatte mit 3 mm² Kupferbelag (Lötpad) an jedem Anschluss © Diotec Semiconductor AG http://www.diotec.com/ 1 2BZX84C3V0 ... 2BZX84C47 (300 mW) Maximum ratings Type Typ Code Kodierung 2 Zener voltage ) Zener-Spanng. 1) IZ = 5 mA Dynamic resistance Inhär. diff. Widerstand rzj [Ω] at f = 1 kHz Temp. Coeffic. of Z-voltage …der Z-spanng. Reverse voltage perrspannung VR at/bei IR Z-current 2) Z-Strom 2) TA = 50°C 2BZX84... or/oder Vzmin [V] Vzmax [V] IZ = 5 mA IZ = 1 mA αVZ [10-4/°C] VR [V] IR [µA] IZmax [mA] ...C3V0 D3.0/MR 2.8 3.2 < 85 < 600 -8...-5 1 10 94 ...C3V3 D3.3/MX 3.1 3.5 < 85 < 600 -8...-5 1 5 86 ...C3V6 D3.6/MY 3.4 3.8 < 85 < 600 -8...-5 1 5 79 ...C3V9 D3.9/MZ 3.7 4.1 < 85 < 600 -8...-5 1 3 73 ...C4V3 D4.3/NA 4.0 4.6 < 80 < 600 -7...-4 1 3 65 ...C4V7 D4.7/NB 4.4 5.0 < 80 < 500 -5...-2 2 3 60 ...C5V1 D5.1/NC 4.8 5.4 < 60 < 480 -2...+2 2 2 56 ...C5V6 D5.6/ND 5.2 6.0 < 40 < 400 -1...+4 2 1 50 ...C6V2 D6.2/NE 5.8 6.6 < 10 < 150 +2...+5 4 3 45 ...C6V8 D6.8/NF 6.4 7.2 < 15 < 80 +3...+6 4 2 42 ...C7V5 D7.5/NH 7.0 7.9 < 15 < 80 +3...+6 5 1 38 ...C8V2 D8.2/NJ 7.7 8.7 < 15 < 80 +4...+7 5 0.7 34 ...C9V1 D9.1/NK 8.5 9.6 < 15 < 100 +4...+7 6 0.5 31 ...C10 D10/NM 9.4 10.6 < 20 < 150 +5...+8 7 0.2 28 ...C11 D11/NN 10.4 11.6 < 20 < 150 +5...+8 8 0.1 26 ...C12 D12/NP 11.4 12.7 < 25 < 150 +5...+8 8 0.1 24 ...C13 D13/NX 12.4 14.1 < 30 < 170 +6...+9 8 0.1 21 ...C15 D15/NY 13.8 15.6 < 30 < 200 +6...+9 10.5 0.05 19 ...C16 D16/NZ 15.3 17.1 < 40 < 200 +6...+9 11.2 0.05 18 ...C18 D18/PA 16.8 19.1 < 45 < 225 +6...+9 12.6 0.05 16 ...C20 D20/PB 18.8 21.2 < 55 < 225 +6...+9 14.0 0.05 14 ...C22 D22/PC 20.8 23.3 < 55 < 250 +7...+10 15.4 0.05 13 ...C24 D24/PD 22.8 25.6 < 70 < 250 +7...+10 16.8 0.05 12 2 mA 2 mA 2 mA 0.5 mA IZ = 1 2 Grenzwerte 1 ...C27 D27/PE 25.1 28.9 < 80 < 300 +7...+10 18.9 0.05 10 ...C30 D30/PF 28 32 < 80 < 300 +7...+10 21.0 0.05 9 ...C33 D33/PH 31 35 < 80 < 325 +7...+10 23.1 0.05 9 ...C36 D36/PJ 34 38 < 90 < 350 +7...+10 25.1 0.05 8 ...C39 D39/PM 37 41 < 130 < 350 +7...+10 27.3 0.05 7 ...C43 D42/PN 40 46 < 150 < 375 +7...+10 30.1 0.05 7 ...C47 D47/PP 44 50 < 170 < 375 +7...+10 32.9 0.05 6 Tested with pulses tp = 5 ms – Gemessen mit Impulsen tp = 5 ms Mounted on P.C. board with 3 mm2 copper pads at each terminal Montage auf Leiterplatte mit 3 mm2 Kupferbelag (Lötpad) an jedem Anschluss http://www.diotec.com/ © Diotec Semiconductor AG