DOMINANT Semiconductors Innovating Illumination SpiceLED TM DATA SHEET: SpiceLEDTM InGaN White M-Spice : SMW-SLD TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size yet the SpiceLED™ packs a powerful performance and is a highly reliable design device. Its versality enables its application in automotive applicances, key-pad illumination, hand-held devices such as PDAs, notebooks, compact back-lighting applications, consumer appliances, office equipment, audio and video equipment. Features: > > > > > > High brightness surface mount LED. Super wide viewing angle of 160°. Equivalent to 0805 package outline. Copper lead-frame construction. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to both IR reflow soldering and TTW soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Communication: indicator and backlight in mobilephone. > Display: full color display video notice board. > Industry: white goods (eg: Oven, microwave, etc.). © 2005 SpiceLED is a trademark of DOMINANT Semiconductors. All rights reserved. Product specifications are subject to change without notice. 1 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination Part Ordering Number Chip Technology / Color SMW-SLD-LM2-1 InGaN • SMW-SLD-L1 White Viewing Angle˚ 160 Luminous Intensity @ IF = 2mA IV (mcd) 11.20 - 28.50 11.20 - 14.00 • SMW-SLD-L2 14.00 - 18.00 • SMW-SLD-M1 18.00 - 22.40 • SMW-SLD-M2 22.40 - 28.50 SMW-SLD-L2N1-1 14.00 - 35.50 • SMW-SLD-L2 14.00 - 18.00 • SMW-SLD-M1 18.00 - 22.40 • SMW-SLD-M2 22.40 - 28.50 • SMW-SLD-N1 28.50 - 35.50 NOTE 1. All part number above comes in a quantity of 3000 units per reel. 2. Other luminious intensity groups are also available upon request 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 2 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination Electrical Characteristics at Ta=25˚C Vf @ If = 2mA Part Number Vf @ If = 10mA Vr @ Ir = 10uA Min. (V) Typ. (V) Max. (V) Typ. (V) Min. (V) 2.6 2.8 3.0 3.0 5 SMW-SLD Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 15 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA 5 V 1000 V 110 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 45 mW Reverse voltage; Ir max = 10µA ESD threshold (HBM) LED junction temperature Power dissipation (at room temperature) Material Material Cu Alloy With NiPdAu Plating Lead-frame High Temperature Resistant Epoxy Resin Package Note: product is Pb free 3 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination Wavelength Grouping Dominant White Bin Structure 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.27 • • • A1 A2 0.28 • • • 0.29 A3 A4 0.30 • • • C1 C2 • • • 0.31 C3 C4 0.32 • • • E1 E2 0.33 • • • 0.34 E3 E4 • • • 0.35 0.36 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin A1 A2 A3 A4 C1 C2 C3 C4 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2732 0.2939 0.3114 0.2907 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2557 0.2764 0.2939 0.2732 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2939 0.3146 0.3321 0.3114 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2764 0.2971 0.3146 0.2939 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.3146 0.3354 0.3529 0.3321 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.2971 0.3179 0.3354 0.3146 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3354 0.3561 0.3736 0.3529 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3179 0.3386 0.3561 0.3354 Cx 0.3275 0.3400 0.3400 0.3275 Cy 0.3561 0.3768 0.3943 0.3736 Cx 0.3275 0.3400 0.3400 0.3275 Cy 0.3386 0.3593 0.3768 0.3561 Cx 0.3400 0.3525 0.3525 0.3400 Cy 0.3768 0.3975 0.4150 0.3943 Cx 0.3400 0.3525 0.3525 0.3400 Cy 0.3593 0.3800 0.3975 0.3768 Bin E1 E2 E3 E4 Dominant color coordinate is measured with an accuracy of ± 0.01. 4 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination Forward Current Vs Forward Voltage 6 30 5 25 Forward Current, mA IV Normalized at 2mA Intensity Vs Forward Current 4 3 2 1 15 10 5 0 0 0 2 4 6 8 10 0 1 2 3 4 Forward Current, mA Forward Voltage, V Maximum Current Vs Ambient Temperature Relative Intensity Vs Wavelength 1.2 20 1 15 Relative Intensity Forward Current, mA 20 10 5 0.8 0.6 0.4 0.2 0 0 0 10 20 30 40 50 60 70 80 90 100 400 450 500 550 600 650 700 Wavelength, nm Ambient Temperature Radiation Pattern 30 o 20 o 10 o 0o 1.0 40 o 50 o 60 o 70 o 80 o 90 o 0.8 0.6 0.4 0.2 0 5 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination SpiceLED • InGaN White M-Spice : SMW-SLD Package Outlines TM Note: The center pad is a common cathode. Please take care during soldering to avoid shorting. 6 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination Recommended Solder Pad Note: Component is based on a new package platform, which features “Bottom Only Terminations“. Solder joints are only formed at the bottom of the component and solder fillet will not be observable as the sides of the component. 7 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination Taping and orientation • Reels come in quantity of 3000 units. • Reel diameter is 180 mm. 8 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination Packaging Specification 9 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT Semiconductors ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : qty S/N : xxx D/C: xxxx GROUP : group Reel Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc SpiceLED 1 completed bag (3000pcs) 0.001 0.034 140 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM Semiconductors For SpiceLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 45,000 MAX Large 416 x 516 x 476 1.74 55 reels MAX 165,000 MAX 10 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination Recommended Sn-Pb IR-Reflow Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 275 235-240˚C 10-30s 250 225 Temperature (˚C) 200 Ramp-up 3˚C/sec max. 183˚C 175 60-150s 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-120s 50 360s max 25 0 50 100 150 200 Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 23/02/2006 V1.0 DOMINANT TM InGaN White M-Spice : SMW-SLD Semiconductors Innovating Illumination Revision History Page Subjects Date of Modification - New Format 23 Feb 2006 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without prior notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Semiconductors. DOMINANT Semiconductors Innovating Illumination TM DOMINANT Semiconductors Sdn Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] Homepage: http://www.dominant-semi.com