Surface Mount VCTCXO ECVT496 § § § § § Low Profile Low Current Consumption Excellent Stability 3V Supply Custom options available Parameter Frequency Range Temperature Stability Storage Temp Stability vs Supply Supply Voltage Control Voltage Pulling Trim Range Supply Current Output Level Output Waveform Output Load Aging ECVT496 9.60 to 20.0MHz 0 o +/-2.5ppm -30 to +75 C (C) 0 o +/-1.0ppm -10 to +60 C (B) 0 o -30 to +80 C +/-0.3ppm +3V (W) +5V (X) 1.5V +/-1.0V Vcc +3V 2.5V +/-1.0V Vcc +5V +/-5ppm min +/-3.0ppm min Internal Trimmer 2.0mA 1.0V p-p (min) Vcc +5V 0.7Vpp (min) Vcc +3V DC Cut Clipped Sine 10KΩ//10pF +/-1ppm / yr Part Numbering ECVT496 Z 9.60 B Type Z= Clipped Sine Frequency Stability Supply Voltage Internal Trimmer W Environmental & Mechanical 0 0 Hunidity +40 C +/-2 C 90% RH for 200Hours 0 Thermal Shock +85 C for 30 mins 0 -30 C for 30 mins Vibration 10 - 55Hz 2mm amplitude 2 hours XYZ axis 0 Soldering 235 +/-5 c Condition 2 Seconds +/-0.5 S Specify Specify Specify Specify I A 12.1 B 11.4 C 3.5 Pin 1 Vcc 2 Vcont D 9.60 3 GND E 8.2 F G H 1.0 7.62 2.54 Dimensions in mm 4 5 6 O/P GND GND J 2.7 ECM Electronics Limited, Penmaen House, Ashington, West Sussex, RH20 3JR, UK Tel: +44(0)1903 892810: Fax: +44(0)1903 892738. Email: [email protected] Although we have attempted to accurately reflect the products we market. ECM reserve the right without prior notice to discontinue any product or make design changes we believe necessary. Issue 1