ECM Surface Mount VCTCXO ECVT8120 Surface Mount 5.0 x 3.2mm Low Profile Low Current Consumption Excellent Stability 3V Supply Parameter Frequency Range Temperature Stability Stability vs Supply Supply Voltage Supply Current Output Level Output Waveform Output Load Pulling Range Control Voltage Phase Noise 1kHz offset Aging ECVT8120 12.80MHz to 19.68MHz +/-2.5ppm -300 to +75oC +/-0.3ppm +3V 2.0mA 0.8V p-p (min) Clipped Sine Wave DC 10KΩ//10pF +/-4ppm (min) Positive +1.5V +/-1.0V DC Specify Environmental & Mechanical Humidity +400C +/-20C 90% RH for 200Hours Thermal Shock +850C for 30 mins -300C for 30 mins Vibration 10 - 55Hz 2mm amplitude 2 hours XYZ axis Soldering 235 +/-50c 2 Seconds +/-0.5 S Condition -130dBc / Hz (max) +/-1ppm / yr Part Numbering ECVT8120 Z 12.80M Type Z= Clipped Sine Frequency Type A B C D E All 5.0 3.2 1.5 0.8 3.71 Dimensions in mm Pin 1 2 3 4 VCONT GND O/P VCC F 1.4 G 4.0 H 2.5 I 1.5 J 1.8 ECM Electronics Limited, Penmaen House, Ashington, West Sussex, RH20 3JR, UK Tel: +44(0)1903 892810: Fax: +44(0)1903 892738. Email: [email protected] Although we have attempted to accurately reflect the products we market. ECM reserve the right without prior notice to discontinue any product or make design changes we believe necessary. Issue 2