EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T Features ․White SMT package. ․Optical indicator. ․Wide viewing angle. ․Soldering methods: reflow soldering ․Available on tape and reel ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 65-11 series is available in soft orange, green, blue, and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light pipe application. Applications ․Optical indicators. ․Coupling into light guides. ․Backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting). ․Coupling into light guides. Device Selection Guide Chip Emitted Color Resin Color Yellow Water Clear Material GaAsP/GaP Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Pd 110 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Units Condition Luminous Intensity IV 180 ------ 450 mcd IF=5mA Viewing Angle 2θ1/2 -- 120 -- deg IF=5mA Forward Voltage VF 2.70 ----- 3.70 V IF=5mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T Bin Range of Luminous Intensity Bin Code Min. Max. S1 180 225 S2 225 280 T1 280 360 T2 360 450 Unit Condition mcd IF=5mA Bin Range of Forward Voltage Group Bin Min. Max. 34 2.70 2.80 35 2.80 2.90 36 2.90 3.00 37 3.00 3.10 38 3.10 3.20 39 3.20 3.30 40 3.30 3.40 41 3.40 3.50 42 3.50 3.60 43 3.60 3.70 G Unit Condition V IF=5mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T Bin Range of Chromaticity Coordinates Bin Code D0-1 D0-3 CIE_u’ CIE_v’ 0.1890 0.5160 0.1934 0.5229 0.2000 0.5130 0.1955 Bin Code CIE_u’ CIE_v’ 0.1934 0.5229 0.1978 0.5298 0.2044 0.5199 0.5061 0.2000 0.5130 0.1955 0.5061 0.2000 0.5130 0.2000 0.5130 0.2044 0.5199 0.2065 0.5031 0.2110 0.5100 0.2021 0.4962 0.2065 0.5031 D0-2 D0-4 Condition IF=5mA Note:Tolerance of Chromaticity Coordinates: ±0.01 The C.I.E. 1931 chromaticity diagram. 0.530 0.525 0.520 D0-2 D0-1 v' 0.515 D0-4 0.510 D0-3 0.505 0.500 0.495 0.185 0.190 0.195 0.200 0.205 0.210 0.215 u' Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T Label Explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. + Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Thermal Shock High Temperature Storage Low Temperature Storage Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 5 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 65-11/Y1P-S1T2GY/2T 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 11 Device No. :DSE-651-225 Date:11-Apr.-2006 Prepared by: Rita Shen