Technical Data Sheet Top View LEDs 67-21B/R6C-AU2W1B/ET Features ․PLCC-2 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (12mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions The 67-21B series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the 67-21B series LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Material Emitted Color AlGaInP Brilliant Red Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 10 Device No. : DSE-0001226 Prepared date:23-Sep-2009 Prepared by: Rita Shen Technical Data Sheet Top View LEDs 67-21B/R6C-AU2W1B/ET Package Dimensions CL 2.2±0.1 2.9±0.2 CL - + 3.25±0.2 Polarity 2.9±0.2 For reflow soldering (propose) Notes: 1.All dimensions are in millimeters 2.Tolerances Unless Dimension = ±0.1mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 10 Device No. : DSE-0001226 Prepared date:23-Sep-2009 Prepared by: Rita Shen Technical Data Sheet Top View LEDs 67-21B/R6C-AU2W1B/ET Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current(Duty 1/10 @ 1KHz) IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge (HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics (Ta=25℃) : Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity IV 565 ----- 1420 mcd IF=20mA Viewing Angle 2θ1/2 ----- 60 ----- deg IF=20mA Peak Wavelength λp ----- 632 ----- nm IF=20mA Dominant Wavelength λd 617.5 ----- 633.5 nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=20mA Forward Voltage VF 1.75 2.0 2.35 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1. Tolerance of Luminous Intensity ±11% 2. Tolerance of Dominant Wavelength ±1nm 3. Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 10 Device No. : DSE-0001226 Prepared date:23-Sep-2009 Prepared by: Rita Shen Technical Data Sheet Top View LEDs 67-21B/R6C-AU2W1B/ET Bin Range Of Luminous Intensity Bin Min U2 V1 V2 W1 565 715 900 1120 Max Unit Condition 715 900 1120 1420 mcd IF=20mA Bin Range of Dominant Wavelength Group Bin Code Min. Max. Unit Condition E4 E5 E6 E7 617.5 621.5 625.5 629.5 621.5 625.5 629.5 633.5 nm IF=20mA Min 1.75 1.95 2.15 Max 1.95 2.15 2.35 Unit Condition V IF=20mA A Bin Range Of Forward Voltage Group Bin 0 1 B 2 Notes: 1. Tolerance of Luminous Intensity ±11% 2. Tolerance of Dominant Wavelength ±1nm 3. Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 10 Device No. : DSE-0001226 Prepared date:23-Sep-2009 Prepared by: Rita Shen Technical Data Sheet Top View LEDs 67-21B/R6C-AU2W1B/ET Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 10 Device No. : DSE-0001226 Prepared date:23-Sep-2009 Prepared by: Rita Shen Technical Data Sheet Top View LEDs 67-21B/R6C-AU2W1B/ET Label Explanation CAT: Luminous Intensity Rank Pb HUE: Dom. Wavelength Rank CPN : P N : XXXXXXXXXXXXX REF: Forward Voltage Rank EVERLIGHT RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 10 Device No. : DSE-0001226 Prepared date:23-Sep-2009 Prepared by: Rita Shen Technical Data Sheet Top View LEDs 67-21B/R6C-AU2W1B/ET Carrier Tape Dimensions: Loaded Quantity 500PCS per reel. + Polarity Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 10 Device No. : DSE-0001226 Prepared date:23-Sep-2009 Prepared by: Rita Shen Technical Data Sheet Top View LEDs 67-21B/R6C-AU2W1B/ET Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Max. 10sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 10 Device No. : DSE-0001226 Prepared date:23-Sep-2009 Prepared by: Rita Shen Technical Data Sheet Top View LEDs 67-21B/R6C-AU2W1B/ET Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 72 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 10 Device No. : DSE-0001226 Prepared date:23-Sep-2009 Prepared by: Rita Shen Technical Data Sheet Top View LEDs 67-21B/R6C-AU2W1B/ET 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 10 Device No. : DSE-0001226 Prepared date:23-Sep-2009 Prepared by: Rita Shen