EVERLIGHT 67-21-G4C-BQ1T2N-2T

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet(Preliminary)
TOP View LEDs
67-21/G4C-BQ1T2N/2T
Features
․P-LCC-2 package.
․White package.
․Optical indicator.
․Colorless clear window.
․Wide viewing angle.
․Suitable for vapor-phase reflow, Infrared reflow
and wave solder processes.
․Computable with automatic placement equipment.
․Available on tape and reel (8mm Tape).
․Pb-free
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 67-21 series is available in soft orange,
green,blue and yellow. Due to the package design,
the LED has wide viewing angle and optimized
light coupling by inter reflector. This feature
makes ideal for light pipe application. The low
current requirement makes this device ideal for
portable equipment or any other application where
power is at a premium.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․Light pipe application.
․General use.
Device Selection Guide
Chip
Material
Emitted Color
InGaN
Brilliant Green
Lens Color
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 1 of 10
Device No. :DSE-671-308
Prepared date:13-Sep-2005
Prepared by: Forrest Chen
EVERLIGHT ELECTRONICS CO.,LTD.
67-21/G4C-BQ1T2N/2T
Package Dimensions
Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 2 of 10
Device No. :DSE-671-308
Prepared date:13-Sep-2005
Prepared by: Forrest Chen
EVERLIGHT ELECTRONICS CO.,LTD.
67-21/G4C-BQ1T2N/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
30
mA
Operating Temperature
Topr
-40 ~ +105
℃
Storage Temperature
Tstg
-40 ~ +105
℃
Electrostatic Discharge(HBM)
ESD
1000
V
Power Dissipation
Pd
100
mW
IFP
100
mA
Peak Forward Current
(Duty 1/10 @1KHz)
Reflow Soldering : 260 ℃ for 10 sec.
Soldering Temperature
Tsol
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Iv
72
-----
450
mcd
IF=20mA
Viewing Angle
2θ1/2
-----
120
-----
deg
IF=20mA
Peak Wavelength
λP
-----
518
-----
nm
IF=20mA
Dominant Wavelength
λd
523.5
-----
535.5
nm
IF=20mA
Spectrum Radiation
Bandwidth
△λ
-----
26
-----
nm
IF=20mA
Forward Voltage
VF
2.7
-----
3.7
V
IF=20mA
Reverse Current
IR
-----
-----
50
μA
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 3 of 10
Device No. :DSE-671-308
Prepared date:13-Sep-2005
Prepared by: Forrest Chen
EVERLIGHT ELECTRONICS CO.,LTD.
67-21/G4C-BQ1T2N/2T
Bin Range Of Dominant Wavelength
Group
Bin Code
Min.
Max.
Unit
Condition
B13
B14
B15
B16
B17
B18
523.5
525.5
527.5
529.5
531.5
533.5
525.5
527.5
529.5
531.5
533.5
535.5
nm
IF=20mA
Max
Unit
Condition
90
112
140
180
225
285
360
450
mcd
IF=20mA
Unit
Condition
V
IF=20mA
B
Bin Rang Of Luminous Intensity
Bin
Min
Q1
Q2
R1
R2
S1
S2
T1
T2
72
90
112
140
180
225
285
360
Bin Rang Of Forward Voltage
Group
Bin
10
11
N
12
13
14
Notes:
Min
2.70
2.90
3.10
3.30
3.50
Max
2.90
3.10
3.30
3.50
3.70
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 4 of 10
Device No. :DSE-671-308
Prepared date:13-Sep-2005
Prepared by: Forrest Chen
EVERLIGHT ELECTRONICS CO.,LTD.
67-21/G4C-BQ1T2N/2T
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 5 of 10
Device No. :DSE-671-308
Prepared date:13-Sep-2005
Prepared by: Forrest Chen
EVERLIGHT ELECTRONICS CO.,LTD.
67-21/G4C-BQ1T2N/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 6 of 10
Device No. :DSE-671-308
Prepared date:13-Sep-2005
Prepared by: Forrest Chen
EVERLIGHT ELECTRONICS CO.,LTD.
67-21/G4C-BQ1T2N/2T
Carrier Tape Dimensions: Loaded quantity 8000 PCS per reel.
Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 7 of 10
Device No. :DSE-671-308
Prepared date:13-Sep-2005
Prepared by: Forrest Chen
EVERLIGHT ELECTRONICS CO.,LTD.
67-21/G4C-BQ1T2N/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
1
Reflow Soldering
2
Temperature Cycle
3
4
5
Thermal Shock
High Temperature
Storage
Low Temperature
Storage
Test Condition
Temp. : 260℃±5℃
Min. 5sec.
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
Test
Sample
Ac/Re
Hours/Cycles Size
6 min
22 PCS.
0/1
300 Cycles
22 PCS.
0/1
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 8 of 10
Device No. :DSE-671-308
Prepared date:13-Sep-2005
Prepared by: Forrest Chen
EVERLIGHT ELECTRONICS CO.,LTD.
67-21/G4C-BQ1T2N/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 9 of 10
Device No. :DSE-671-308
Prepared date:13-Sep-2005
Prepared by: Forrest Chen
EVERLIGHT ELECTRONICS CO.,LTD.
67-21/G4C-BQ1T2N/2T
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 10 of 10
Device No. :DSE-671-308
Prepared date:13-Sep-2005
Prepared by: Forrest Chen