EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet (Preliminary) Surface Mount Device (Power Top View LED) 67-31A/RSC-AV1W2B9Z5/2T Features ․PLCC-3 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions The 67-31A series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Material AlGaInP Emitted Color Brilliant Red Everlight Electronics Co., Ltd. Device No. : Lens Color Water Clear http://www.everlight.com prepared date:10-Jan-2005 Rev. 1 Page: 1 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/RSC-AV1W2B9Z5/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:10-Jan-2005 Rev. 1 Page: 2 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/RSC-AV1W2B9Z5/2T Absolute Maximum Ratings (TA=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 70 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Pd 220 mW IFP 150 mA Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics : Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 715 ----- 1800 mcd IF=50mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=50mA Peak Wavelength λP ----- 632 ----- nm IF=50mA Dominant Wavelength λd 617.5 ----- 633.5 nm IF=50mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=50mA Forward Voltage VF 2.15 ----- 2.75 V IF=50mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:10-Jan-2005 Rev. 1 Page: 3 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/RSC-AV1W2B9Z5/2T Bin Range Of Dominant Wavelengths Group Bin Code Min. Max. Unit Condition A E4 E5 E6 E7 617.5 621.5 625.5 629.5 621.5 625.5 629.5 633.5 nm IF=50mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition V1 V2 W1 W2 715 900 1120 1420 900 1120 1420 1800 mcd IF=50mA Bin Range Of Forward Voltage Group B9 Bin Min Max Unit Condition 2 3 4 2.15 2.35 2.55 2.35 2.55 2.75 V IF=50mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:10-Jan-2005 Rev. 1 Page: 4 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/RSC-AV1W2B9Z5/2T Typical Electro-Optical Characteristic Curves Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:10-Jan-2005 Rev. 1 Page: 5 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/RSC-AV1W2B9Z5/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:10-Jan-2005 Rev. 1 Page: 6 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/RSC-AV1W2B9Z5/2T Carrier Tape Dimensions; Loaded quantity per reel 2000 PCS/reel Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : Desiccant http://www.everlight.com prepared date:10-Jan-2005 Label Rev. 1 Page: 7 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/RSC-AV1W2B9Z5/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5 sec. Test Sample Ac/Re Hours/Cycles Size 22 PCS 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 2 Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:10-Jan-2005 6 Min. Rev. 1 Page: 8 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/RSC-AV1W2B9Z5/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:10-Jan-2005 Rev. 1 Page: 9 of 10 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/RSC-AV1W2B9Z5/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com prepared date:10-Jan-2005 Rev. 1 Page: 10 of 10 Prepared by: Venis Wu