EVERLIGHT ELECTRONICS CO., LTD. DATA SHEET Part No. ：67-21/T6C-MU2W1E/2T Date ：2007.6.3 Department：RD3 Revision ：1.1 Received □ MASS PRODUCTION ■ PRELIMINARY □ CUSTOMER DESIGN PAGE : 11 Revised record REV. DESCRIPTION RELEASE DATE 1.1 New Spec. 2007.6.3 OFFICE:.NO.25,LANE76,SEC.3,CHUNG YANG RD.,TUCHENG 236,TAIPEI,TAIWAN,R.O.C TEL : 886-2-22672000 FAX : 886-2-22676244 http://www.everlight.com EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T Features y y y y y y P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. y Computable with automatic placement equipment. y Available on tape and reel (8mm Tape). y Pb-free Descriptions y The 67-21 series is available for orange, green, blue and yellow or other color due to the different raw material. y Base on the package design, the device result in wide view angle. Applications y Automotive backlighting or indicator：Dashboard, switch, audio and video equipments…etc. y Backlight：LCD, switches, symbol, mobile phone and illuminated advertising. y Display for indoor and outdoor application：Traffic…etc. y Ideal for coupling into light guides. y Substitution of traditional light y Optical indicator y General applications. Device Selection Guide Chip Emitted Color Resin Color Pure White Water Clear Material InGaN/SiC Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 1 / 11 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T Package Dimensions CL 2.2±0.1 CL - + Polarity 2.4±0.1 For reflow soldering (propose) Note：Tolerance of Dimension：±0.1mm. Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 2 / 11 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 120 mW Electrostatic Discharge ESD 1000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 565 ----- 1420 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Forward Voltage VF 2.75 ---- 3.65 V IF=20mA Reverse Current IR ----- ----- 50 μA VR=5V Notes： 1. Tolerance of Luminous Intensity：±11% 2. Tolerance of Dominant Wavelength：±1nm 3. Tolerance of Forward Voltage：±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 3 / 11 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T Bin Range of Luminous Intensity Bin Min Max U2 565 715 V1 715 900 V2 900 1120 W1 1120 1420 Unit Condition mcd IF=20mA Unit Condition V IF=20mA Bin Range of Forward Voltage Group E Bin Code Min. Max. 5 2.75 3.05 6 3.05 3.35 7 3.35 3.65 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 4 / 11 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T Bin Range of Chromaticity Coordinates CIE_x CIE_y 0.296 0.276 0.292 0.286 0.300 0.295 0.295 0.304 0.285 0.300 0.295 0.304 0.285 0.297 0.305 0.300 0.295 0.307 0.315 0.309 0.305 0.309 0.305 0.311 0.294 0.272 0.258 0.280 0.248 0.264 0.267 0.272 0.258 0.276 0.281 0.282 0.272 0.282 0.272 0.288 0.262 0.282 0.272 0.288 0.262 0.276 0.281 0.282 0.272 0.287 0.295 0.292 0.286 0.292 0.286 0.296 Notes：*The C.I.E. 1931 chromaticity diagram (Tolerance ±0.01). 0.276 Group Bin Code CIE_x CIE_y 0.291 0.286 0.287 0.295 0.297 0.305 0.300 (IF=20mA) B5-1 B5-2 M A0-1 A0-2 Bin Code B5-3 B5-4 A0-3 A0-4 0.32 0.31 B5-2 0.30 B5-4 B5-1 0.29 B5-3 A0-2 y 0.28 A0-4 0.27 A0-1 0.26 A0-3 0.25 0.24 0.26 0.27 0.28 0.29 0.30 0.31 x Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 5 / 11 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 6 / 11 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions 2.2 0.5 178.0 1.0 60.0 1.0 9.0 1.0 12.0 1.0 13.0 0.5 Note：Tolerances unless dimension ±0.1mm. Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 7 / 11 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Progressive direction 4.0 0.23 8.0±0.3 3.5±0.05 1.75 1.5+0.1 1.75 4.0±0.1 2.0±0.05 3.23 2.24 Polarity Note：Tolerances unless dimension ±0.1mm. Unit = mm Moisture Resistant Packing Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 8 / 11 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5 sec. 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage 5 Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 9 / 11 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C . M ax. 10 Sec. M ax. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. M ax. A bove 220°C 120 Sec. M ax. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 10 / 11 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Top View LEDs 67-21/T6C-MU2W1E/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.1 Device No. : Prepared date: 03-June-2007 pared by: Josh Chou Page: 11 / 11