Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Features ԦPopular 10 mm package. ԦView angle:25± . ԦHigh light flux output ԦSoldering methods: Dip soldering. ԦOptical efficiency: 42 lm/W ԦThermal resistance (junction to leadframe): 13K/W ԦThe product itself will remain within RoHS compliant version. ԦESD-withstand voltage: up to 4KV Descriptions ԦThe series is specially designed for applications requiring higher brightness. ԦThe LED lamps are available with different colors, intensities, epoxy colors, etc. Applications ԦFlashlight ԦSunshine light. ԦAdvertising Signs. ԦBack lighting. Device Selection Guide LED Part No. EHP-5393/SUR01-P01 Chip Material Emitted Color AlGaInP Brilliant Red Lens Color Water Clear Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev: 2 Page: 1 of 8 Device Number : DLE-539-002 Prepared date:12-25-2007 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Package Dimensions #'" ! &% # $ "!"#% '$# *+ ) #" ! '# " ! (( #' %$ +#* ) #" ! %# $ #" ! %# $ ! #"$ #+ * ) !"#$ """#$%&' !"#$ !"""()*+%&' "!"#% Notes: ԦOther dimensions are in millimeters, tolerance is 0.25mm except being specified. ԦProtruded resin under flange is 1.5mm Max LED. ԦBare copper alloy is exposed at tie-bar portion after cutting. Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev: 2 Page: 2 of 8 Device Number : DLE-539-002 Prepared date:12-25-2007 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Absolute Maximum Rating (Ta=25к к) Parameter Forward Current Symbol IF Absolute Maximum Rating 385 Unit mA Thermal resistance (junction to leadframe) Rth(j-l) 13 K/W Operating Temperature Storage Temperature Electrostatic Discharge Topr Tstg ESD -40 ~ +85 -40 ~ +100 4K к к V Soldering Temperature Tsol 260 к Power Dissipation Pd 1.3 Reverse Voltage VR 5 W V Zener Reverse Current Iz 100 mA Notes: Soldering timeЉ5 seconds. Electro-Optical Characteristics (Ta=25к к) Parameter Symbol Min. Typ. Max. Unit Condition Total Flux Flux 27 35 45 lm Peak Wavelength ӳp -- 632 -- nm Dominant Wavelength ӳd 620 624 628 nm Viewing Angle 2Ӱ1/2 -- 25 -- deg Forward Voltage VF 2.0 2.4 3.0 V Reverse Current IR -- -- 10 ӴA VR=5V Zener Reverse Voltage Vz 5.2 -- -- V Iz=5mA IF=350mA Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev: 2 Page: 3 of 8 Device Number : DLE-539-002 Prepared date:12-25-2007 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Rank Combination (IF=350mA) Rank R1 R2 R3 Total Flux 27~33 33~39 *Measurement Uncertainty of Total Flux: !15% 39~45 Unit:lm Forward Voltage Combination (V at 350mA) Rank 2 Forward Voltage 2.0~2.2 3 3/33/5! 4 5 6 2.4~2.6 2.6~2.8 2.8~3.0 *Measurement Uncertainty of Forward Voltage: !0.1V Unit:V Color Combination ( at 350mA) Rank 1 2 Dominant Wavelength 620~624 624~628 *Measurement Uncertainty of Dominant Wavelength !1.0nm Unit:nm *The quantity ratio of the ranks is decided by EVERLIGHT. Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev: 2 Page: 4 of 8 Device Number : DLE-539-002 Prepared date:12-25-2007 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev: 2 Page: 5 of 8 Device Number : DLE-539-002 Prepared date:12-25-2007 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Packing Quantity Specification 1.100PCS/1BagΔ5Bags/1Box 2.10Boxes/1Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number EVERLIGHT QTY: Packing Quantity CPN: P/N: CAT: Ranks of Total Flux and Forward Voltage RoHS EHP-5393/SUR01-P01 QTYΚ LOT NOΚ HUE: Ranks of Dominant Wavelength REF: Reference CAT: HUE: REF: LOT No: Lot Number MADE IN TAIWAN: Production Place MADE IN TAIWAN Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev: 2 Page: 6 of 8 Device Number : DLE-539-002 Prepared date:12-25-2007 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light up. Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev: 2 Page: 7 of 8 Device Number : DLE-539-002 Prepared date:12-25-2007 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 6. If the emitter is operated, consider using metal heat sink with the lowest possible thermal resistance. We do not recommend lighting the emitter for more than a few seconds without an additional heat sink. For the thermal performance using a flat heat sink, allow an exposed surface area of about 25mm2 at least. 7. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering Temp. at tip of iron DIP Soldering 350к Max. (30W Max.) Preheat temp. 100к Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 260 Max. Distance 3mm Min.(From solder joint to case) Bath time. 5 sec Max. Distance 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev: 2 Page: 8 of 8 Device Number : DLE-539-002 Prepared date:12-25-2007 Prepared by: Dantechen