RGPZ10A . . . 10M Series Preliminary Data Sheet 1.0 Amp Glass Passivated Sintered Fast Switching Rectifiers Description Mechanical Dimensions JEDEC D0-41 .205 .160 .080 .107 1.00 Min. .031 typ. Features n LOWEST COST FOR GLASS SINTERED FAST SWITCHING CONSTRUCTION n 1.0 AMP OPERATION @ TA = 55°C, WITH NO THERMAL RUNAWAY n LOWEST VF FOR GLASS SINTERED FAST SWITCHING CONSTRUCTION n SINTERED GLASS CAVITY-FREE JUNCTION n TYPICAL IR < 100 nAmps Electrical Characteristics @ 25 o C. Maximum Ratings Units RGPZ10A . . . 10M Series 10A 10B 10D 10G 10J 10K 10M Peak Repetitive Reverse Voltage...VRRM 50 100 200 400 600 800 1000 Volts RMS Reverse Voltage...VR(rms) 35 70 140 280 420 560 700 Volts DC Blocking Voltage...VDC 50 100 200 400 600 800 1000 Volts Average Forward Rectified Current...IF(av) Current 3/8" Lead Length @ TA = 55°C ............................................. 1.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM 8.3mS, ½ Sine Wave Superimposed on Rated Load ............................................. 3 0 ............................................... Amps Forward Voltage @ 1.0A...VF ............................................. 1.2 ............................................... Volts Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 55°C ............................................. 1 0 0 ............................................... µAmps ............................................. 5.0 ............................................... ............................................. 2 0 0 ............................................... µAmps µAmps Typical Junction Capacitance...CJ (Note 1) ............................................. 1 5 ............................................... pF Maximum Thermal Resistance...RθJA (Note 2) ............................................. 5 5 ............................................... °C / W Maximum Reverse Recovery Time...tRR (Note 3) < ..................... 1 5 0 ................... > DC Reverse Current...IR(max) @ Rated DC Blocking Voltage TA = 25°C TA = 150°C < ....... 5 0 0 ...... > nS Operating & Storage Temperature Range...TJ, TSTRG ......................................... -65 to 175 .......................................... °C 250 Preliminary Data Sheet 1.0 Amp Glass Passivated Die Dimension (mils) Forward Current Derating Curve A RESISTIVE OR INDUCTIVE LOAD T Amps D Glass 0.375″″ (9.5mm) LEAD LENGTH G d D 68 TA = Ambient Temperature (°°C) d G 43 2+0.5 T 11 A 15+1 Typical Junction Capacitance Non-Repetitive Peak Forward Surge Current TJ = 25°°C f = 1.0 MHZ VSIG = 50mVp-p Amps pF TJ = TJ max. 8.3 mS Single Half Sine Wave (Jedec Method) RGPZ10A . . . 10M Series Sintered Fast Switching Rectifiers Number of Cycles @ 60 HZ Typical Instantaneous Forward Characteristics Reverse Voltage (Volts) Typical Reverse Characteristics Amps µ Amps TJ = 100°°C TJ = 75°°C TJ = 25°°C Volts Percent of Rated Peak Voltage NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. Thermal Resistance from Junction to Ambient at 3/8" Lead Length, P.C. Board Mounted. 3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A. Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%.