RGP30A THRU RGP30M GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER * Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes FEATURES P A T E N T E D DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 0.052 (1.32) 1.0 (25.4) MIN. 0.048 (1.22) DIA. ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ High temperature metallurgically bonded construction ♦ 3.0 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.2µA ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 ® MECHANICAL DATA Case: JEDEC DO-201AD molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.12 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RGP 30A RGP 30B Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 3.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 125.0 Amps VF 1.3 Volts IR 5.0 100.0 µA IR(AV) 100.0 µA Maximum instantaneous forward voltage at 3.0A Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=125°C Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length at TA=55°C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range trr CJ RGP 30G 150 RGP 30J 250 RGP 30K RGP 30M 500 UNITS Volts ns 60.0 pF RΘJA 20.0 °C/W TJ,TSTG -65 to +175 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted 4/98 RGP 30D FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 4.0 200 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RATINGS AND CHARACTERISTIC CURVES RGP30A THRU RGP30M 3.0 2.0 1.0 0.375" (9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 175 100 10 AMBIENT TEMPERATURE, °C TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 20 10 1 TJ=25°C PULSE WIDTH=300µs 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=100°C 1 TJ=75°C 0.1 TJ=25°C 0.01 JUNCTION CAPACITANCE, pF FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 10 1 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 REVERSE VOLTAGE, VOLTS 100 TJ=125°C 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, %