ISDN TEW5613 Transmit Transformer TEW5613 is specifically designed to be used as a Transmit transformer in test setups for testing Longitudinal Balance and Return Loss in Primary Rate and Basic Rate Circuits. Features: • Very low Leakage Inductance. • Excellent balance. MECHANICAL 10 5 1.08 4 L ALL DIMENSIONS ARE IN INCHES 0.90 2 H DRILL PATTERN COMPONENT SIDE 2 HOLES DIA. 0.100" 12 HOLES DIA. 0.040" 0.025 7 W 1 G. 2 GND. PINS 0.025" X 0.080" 5567.chp 95/04/05 0.99 0.83 G 6 ISSUE:B Dimensions 12 G 1.1 Pri. Sec. (1-2)+(4-5) (6-10) (6-10) > 650 mH Leakage Inductance. (6-10) < 60 µH Filtran Limited 1.30"max. H 1.20" max. 135-900 Ω 135-900 Ω Inductance Dielectric Strength W TEW5613 (1-2):(4-5):(6-10) Frequency Response 1.45" max. DOT AT PIN #1 Turns ratio Winding Resistance L GRID 0.1 x 0.1 ELECTRICAL SPECIFICATIONS Impedance 6 8 1 Pri. Sec. (1-2) & (4-5) (6-10) 200 Hz - 300 KHz 1:1:2 2.8 Ω 6.6 Ω < 0.25 dB 1000 Vrms 229 Colonnade Road, Nepean, Ontario, Canada. K2E 7K3, Tel: (613) 226-1626 Fax: (613) 226-7124 6-7