Thru-Hole DIP Switches SERIES 90B FEATURES • Tested for TO-116 Equipment • Up to 10 Positions • High Pressure, Reliable Contacts • Molded (Sealed) Base and Optional Top Seal Machine Insertable MIDIP 90B DIMENSIONS CIRCUITRY In inches (and millimeters) As viewed from the top of the switch in the positions shown in the drawing. Switch is packaged as shown here with all positions on. O N 1 DIP Switches .290 (7,37) MAX. .165 ± .005 (4,19 ± 0,13) CL .012 ± .001 (0,30 ± 0,03) TYP. .375 ± .010 (9,53 ± 0,25) 2 4 5 6 7 8 LENGTH ± .010 (0,25) SEE CHART .195 (4,95) MAX. .135 ± .010 (3,43 ± 0,25) TYP. 3 .020 ± .002 (0,51 ± 0,05) TYP. .100 ± .005 (2,54 ± 0,13) TYP. .085 ± .005 (2,16 ± 0,13) TYP. DESIGNED FOR .100 X .300 (2,54 X 7,62) ON CENTER HOLES ORDERING INFORMATION: Tube Packaging (Each tube is 19.5 inches long) No. of Positions Length Inches Length Metric Number Per Tube 2 3 4 5 6 7 8 9 10 .270" .370" .470" .570" .670" .770" .870" .970" 1.070" 6,9 mm 9,4 mm 11,9 mm 14,5 mm 17,0 mm 19,6 mm 22,1 mm 24,6 mm 27,2 mm 60 47 37 31 26 23 20 18 16 Part Number* Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. 90B02PT 90B03PT 90B04PT 90B05PT 90B06PT 90B07PT 90B08PT 90B09PT 90B10PT *The "P"in the part number denotes top tape seal versions. To order without top tape seal, leave the "P" off the part number when ordering. DIP 9 Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com