Thru-Hole DIP Switches SERIES 90B FEATURES • Tested for TO-116 Equipment • Up to 10 Positions • High Pressure, Reliable Contacts • Molded (Sealed) Base and Optional Top Seal Machine Insertable MIDIP 90B DIP Switches CIRCUITRY DIMENSIONS In inches (and millimeters) As viewed from the top of the switch in the positions shown in the drawing. Switch is packaged as shown here with all positions on. O N 1 .290 (7,37) MAX. .165 ± .005 (4,19 ± 0,13) C L .012 ± .001 (0,30 ± 0,03) TYP. .375 ± .010 (9,53 ± 0,25) 2 4 5 6 7 8 LENGTH ± .010 (0,25) SEE CHART .195 (4,95) MAX. .135 ± .010 (3,43 ± 0,25) TYP. 3 .020 ± .002 (0,51 ± 0,05) TYP. .100 ± .005 (2,54 ± 0,13) TYP. .085 ± .005 (2,16 ± 0,13) TYP. DESIGNED FOR .100 X .300 (2,54 X 7,62) ON CENTER HOLES ORDERING INFORMATION: Tube Packaging (Each tube is 19.5 inches long) ADDITIONAL INFORMATION No. of Positions Length Inches Length Metric Number Per Tube Part Number* For Specifications, see page B-14. For Options and Accessories, see page B-20. 2 3 4 5 6 7 8 9 10 .270" .370" .470" .570" .670" .770" .870" .970" 1.070" 6,9 mm 9,4 mm 11,9 mm 14,5 mm 17,0 mm 19,6 mm 22,1 mm 24,6 mm 27,2 mm 60 47 37 31 26 23 20 18 16 90B02S 90B03S 90B04S 90B05S 90B06S 90B07S 90B08S 90B09S 90B10S Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. *The "S" at the end of the part number denotes top tape seal versions. To order without top tape seal, leave the "S" off the part number when ordering. B-9 Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com