CORPORATION ISSUED DATE :2006/11/20 REVISED DATE : GL9401A NPN SI L I CO N PL AN AR MEDI UM PO W ER HI G H G AI N T RANSI ST O R Description The GL9401A is designed for general purpose switching and amplifier applications. Features 5 Amps continuous current, up to 20Amps pulse current Low saturation voltages High Gain Package Dimensions SOT-223 REF. A C D E I H Millimeter Min. Max. 6.70 7.30 2.90 3.10 0.02 0.10 0° 10° 0.60 0.80 0.25 0.35 REF. B J 1 2 3 4 5 Millimeter Min. Max. 13°TYP. 2.30 REF. 6.30 6.70 6.30 6.70 3.30 3.70 3.30 3.70 1.40 1.80 Absolute Maximum Ratings at Ta = 25 Parameter Junction Temperature Storage Temperature Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current (DC) Collector Current (Pulse) Total Power Dissipation Symbol Ratings Unit Tj Tstg VCBO VCEO VEBO IC ICM PD +150 -55~+150 80 30 5 5 20 2.5 V V V A A W *The power which can be dissipated assuming the device is mounted in typical manner on a PCB with copper equal to 2 inches x 2 inches. Electrical Characteristics (Ta = 25 Symbol BVCBO *BVCES BVCEO BVCEV BVEBO ICBO ICES IEBO *VCE(sat)1 *VCE(sat)2 *VCE(sat)3 *VCE(sat)4 *VBE(sat) *VBE(on) *hFE1 *hFE2 *hFE3 *hFE4 GL9401A , unless otherwise stated) Min. Typ. Max. Unit 80 80 30 80 5 280 300 300 180 - 10 10 10 60 100 250 330 1.05 1.0 1200 - V V V V V nA nA nA mV mV mV mV V V Test Conditions IC=100uA , IE=0 IC=100uA IC=10mA, IB=0 IC=10uA, VEB=1V IE=100uA ,IC=0 VCB=35V, IE=0 VCES=35V VEB=4V, IC=0 IC=500mA, IB=10mA IC=1A, IB=10mA IC=3A, IB=30mA IC=5A, IB=50mA IC=5A, IB=50mA VCE=2V, IC=5A VCE=2V, IC=10mA VCE=2V, IC=0.5A VCE=2V, IC=1A VCE=2V, IC=5A Page: 1/2 CORPORATION *hFE5 fT Cob ton toff 40 - 180 45 125 380 *Measured under pulse condition. Pulse width Characteristics Curve 60 - ISSUED DATE :2006/11/20 REVISED DATE : MHz pF VCE=2V, IC=20A VCE=10V, IC=50mA, f=100MHz VCB=10V, IE=0, f=1MHz ns VCC=10V, IC=4A, IB1=IB2=40mA 300 s, Duty Cycle 2% Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 GL9401A Page: 2/2