5.0 mm DIA LED 520PG0C LAMP REV:A / 2 PACKAGE DIMENSIONS Note: 1.All Dimensions are in millimeters. 2.Tolerance is ±0.25mm(0.010 ") Unless otherwise specified. 3.Protruded resin under flange is 1.5mm(0.059 ") max. 4.Lead spacing is measured where the leads emerge from the package. 5.Specification are subject to change without notice 6.highlight <-400V the led can withstand the max static level when assembling or operation. DRAWING NO. : DS-35-03-0782 DATE: 2004-08-07 Page: 1 HD-R/R013 5.0 mm DIA LED 520PG0C LAMP REV:A / 2 FEATURES * SUITABLE HIGH PULSE CURRENT OPERATION * EXTRA HIGH RADIANT POWER AND RADIANT INTENSITY * HIGH RELIABILITY * LOW FORWARD VOLTAGE CHIP MATERIALS * Dice Material : GaInN/GaN * Light Color : BLUEGREEN * Lens Color : WATER CLEAR ABSOLUTE MAXIMUM RATING:(Ta＝25°C) SYMBOL DESCRIPTION BLUEGREEN 120 UNIT PAD Power Dissipation Per Chip VR Reverse Voltage Per Chip 5 V IF Average Forward Current Per Chip 30 mA - Derating Linear From 25°C Per Chip 0.4 mA/°C Topr Operating Temperature Range mW -25°C to 85°C Tstg Storage Temperature Range -40°C to 85°C Lead Soldering Temperature｛1.6mm(0.063 inch) From Body｝260°C±5°C For 5 Seconds ELECTRO-OPTICAL CHARACTERISTICS:(Ta=25°C) SYMBOL DESCRIPTION TEST CONDITION MIN. TYP. MAX. UNIT 3.5 4.0 V 100 µA VF Forward Voltage IF = 20mA IR Reverse Current VR = 5V λD Dominant Wavelength IF = 20mA 505 ∆λ Spectral Line Half-Width IF = 20mA 22 2θ1/2 Half Intensity Angle IF = 20mA 20 Iv Luminous Intensity IF = 20mA 6500 DRAWING NO. : DS-35-03-0782 DATE: 2004-08-07 nm nm deg 8000 mcd Page: 2 HD-R/RD014 5.0 mm DIA LED 520PG0C （ DRAWING NO. : DS-35-03-0782 LAMP REV:A / 2 ） DATE: 2004-08-07 Page: 3