5.5*4.4 mm DIA ELLIPSE LED LAMP L-763HURC PACKAGE DIMENSIONS Note: 1.All Dimensions are in millimeters. 2.Tolerance is ±0.25mm(0.010 ") Unless otherwise specified. 3.Protruded resin under flange is 1.5mm(0.059 ") max. 4.Lead spacing is measured where the leads emerge from the package. 5.Specification are subject to change without notice DRAWING NO. : DATE : Page : 1 5.5*4.4 mm DIA ELLIPSE LED LAMP L-763HURC FEATURES * 5.5*4.0mm DIA ELLIPSE LED LAMP * HIGH LUMINOUS INTENSITY OUTPUT. * LOW POWER CONSUMPTION. * HIGH EFFICIENCY. * VERSATILE MOUNTING ON P.C. BOARD OR PANEL. * I.C. COMPATIBLE. CHIP METERIALS * Dice Material : AlGaInP/GaAs * Light Color : ULTRA RED * Lens Color : WATER CLEAR ABSOLUTE MAXIMUM RATING : ( Ta = 25°C ) SYMBOL PARAMETER HI.EFF. RED UNIT PAD Power Dissipation Per Chip 80 mW VR Reverse Voltage Per Chip 5 V IAF Continuous Forward Current Per Chip 30 mA IPF Peak Forward Current Per Chip (Duty－0.1,1KHz) 60 mA － Derating Linear From 25°C Per Chip 0.40 mA/°C Topr Operating Temperature Range -25°C to 85°C Tstg Storage Temperature Range -40°C to 85°C Lead Soldering Temperature｛1.6mm(0.063 inch) From Body｝260°C ± 5°C for 5 Seconds ELECTRO-OPTICAL CHARACTERISTICS : ( Ta = 25°C ) SYMBOL PARAMETER TEST CONDITION MIN. TYP. MAX. UNIT VF Forward Voltage IF = 20mA IR Reverse Current VR = 5V λD Dominant Wavelength IF = 20mA 635 nm ∆λ Spectral Line Half-Width IF = 20mA 20 nm 2θ1/2 Half Intensity Angle(H/V) IF = 20mA 20/55 deg Luminous Intensity IF = 20mA 3000 mcd IV DRAWING NO. : DATE : 2.0 2.6 V 100 µA Page : 2 5.5*4.4 mm DIA ELLIPSE LED LAMP L-763HURC DRAWING NO. : DATE : Page : 3