HMC543 v01.0507 PHASE SHIFTERS - CHIP 3 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Typical Applications Features The HMC543 is ideal for: Low RMS Phase Error: 5° • EW Receivers Low Insertion Loss: 6.5 dB • Weather & Military Radar Excellent Flatness • Satellite Communications 360° Coverage, LSB = 22.5° • Beamforming Modules Die Size: 0.99 x 2.46 x 0.1 mm Functional Diagram General Description The HMC543 is a 4-bit digital phase shifter die which is rated from 8 to 12 GHz, providing 0 to 360 degrees of phase coverage, with a LSB of 22.5 degrees. The HMC543 features very low RMS phase error of 5 degrees and extremely low insertion loss variation of ±0.8 dB across all phase states. This high accuracy phase shifter is controlled with complementary logic of 0/-3V, and requires no fixed bias voltage and is internally matched to 50 Ohms with no external components. Simple external level shifting circuitry can be used to convert a positive CMOS control voltage into complementary negative control signals. Electrical Specifications, TA = +25° C, 50 Ohm System, Control Voltage = 0/-3V Parameter Frequency Range Min. Typ. 8 Insertion Loss* 5 Input Return Loss* 10 Output Return Loss* 10 Phase Error* ±10 RMS Phase Error Gain Variation* Input Power for 1 dB Compression 21 Max. Units 12 GHz 7 dB dB dB ±15 5 deg ±0.8 dB 24.5 dBm Input Third Order Intercept 40 dBm Control Voltage Current <2 mA *Note: All States Shown 3-8 deg For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC543 v01.0507 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Insertion Loss, All States Normalized Loss, All States 0 4 3 -4 -6 -8 -10 2 3 1 0 -1 -2 -3 -12 -4 8 9 10 11 12 8 9 FREQUENCY (GHz) Input Return Loss, All States 12 11 12 20 15 PHASE ERROR (degrees) -5 RETURN LOSS (dB) 11 Phase Error, All States 0 -10 -15 -20 -25 10 5 0 -5 -10 -15 -30 -20 8 9 10 11 12 8 9 FREQUENCY (GHz) 10 FREQUENCY (GHz) Output Return Loss, All States Relative Phase Shift, All States 0 RELATIVE PHASE SHIFT (degrees) 400 -5 RETURN LOSS (dB) 10 FREQUENCY (GHz) PHASE SHIFTERS - CHIP NORMALIZED LOSS (dB) INSERTION LOSS (dB) -2 -10 -15 -20 -25 -30 350 300 250 200 150 100 50 0 8 9 10 FREQUENCY (GHz) 11 12 8 9 10 11 12 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 3-9 HMC543 v01.0507 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Input IP3, All States 55 15 50 10 45 IP3 (dBm) 20 5 0 40 35 RMS AVERAGE MAX -5 30 -10 25 8 9 10 11 12 8 9 FREQUENCY (GHz) 30 90 28 P1dB (dBm) 100 80 70 12 11 12 26 24 22 50 20 8 9 10 11 12 8 9 FREQUENCY (GHz) 10 FREQUENCY (GHz) RMS Phase Error vs. Temperature Maximum Insertion Loss vs. Temperature 0 20 15 INSERTION LOSS (dB) RELATIVE PHASE SHIFT (degrees) 11 Input P1dB, All States 60 10 5 0 +25C +85C -40C -5 -10 -2 -4 -6 +25 deg C +85 deg C -40 deg C -8 -10 8 9 10 FREQUENCY (GHz) 3 - 10 10 FREQUENCY (GHz) Input IP2, All States IP2 (dBm) PHASE SHIFTERS - CHIP 3 RELATIVE PHASE SHIFT (degrees) Relative Phase Shift, RMS, Average, Max, All States 11 12 8 9 10 11 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 12 HMC543 v01.0507 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Phase Error vs. State 20 8 GHz 10 3 5 0 -5 -10 9,10,11 & 12 GHz -15 -20 0 50 100 150 200 250 300 350 STATE (degrees) Control Voltage Absolute Maximum Ratings Input Power (RFin) (8-12 GHz) +27 dBm (T= +85 °C) Channel Temperature (Tc) 150 °C Thermal Resistance (channel to die bottom) 130 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C State Bias Condition Low (0) -2.5 to -3.5V @ 0.4 μA Typ. High (1) 0 to +0.3V @ 0.4 μA Typ. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS PHASE SHIFTERS - CHIP PHASE ERROR (degrees) 15 Truth Table Bit 1 Bit 1 Bit 2 Control Voltage Input Bit 2 Bit 3 Bit 3 Bit 4 Bit 4 Phase Shift (Degree) RFIN - RFOUT 0 1 0 1 0 1 0 1 Reference 1 0 0 1 0 1 0 1 22.5 0 1 1 0 0 1 0 1 45.0 0 1 0 1 1 0 0 1 90.0 0 1 0 1 0 1 1 0 180.0 1 0 1 0 1 0 1 0 337.5 Any combination of the above states will provide a phase shift approximately equal to the sum of the bits selected. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 3 - 11 HMC543 v01.0507 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Outline Drawing PHASE SHIFTERS - CHIP 3 Die Packaging Information [1] Standard Alternate GP-2 [2] [1] Refer to the “Packaging Information” section for die packaging dimensions. [2] For alternate packaging information contact Hittite Microwave Corporation. NOTES: 1. ALL DIMENSIONS IN INCHES (MILLIMETERS) 2. DIE THICKNESS IS 0.007 3. TYPICAL BOND PAD IS 0.004 SQUARE 4. BACKSIDE METALLIZATION: GOLD 5. BACKSIDE METAL IS GROUND 6. BOND PADS METALLIZATION: GOLD 7. NO CONNECTION REQUIRED FOR UNLABELED BOND PADS 8. OVERALL DIE SIZE ±0.002 3 - 12 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC543 v01.0507 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Pad Descriptions Function Description 1, 3, 12, 14 GND These pins and die bottom must be connected to RF/DC ground. 2 RFIN This port is matched to 50 Ohms. BIT3, BIT1, Non-Inverted Control Input. See truth table and control voltage tables. 4, 7, 9, 11 BIT2, BIT4 5, 6, 8, 10 13 BIT3, BIT1 BIT2, BIT4 Inverted Control Input. See truth table and control voltage tables. RFOUT This port is matched to 50 Ohms. Interface Schematic Application Circuit For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 3 PHASE SHIFTERS - CHIP Pad Number 3 - 13 HMC543 v01.0507 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Assembly Diagram PHASE SHIFTERS - CHIP 3 Handling Precautions Follow these precautions to avoid permanent damage. Storage: All bare die are placed in either Waffle or Gel based ESD protective containers, and then sealed in an ESD protective bag for shipment. Once the sealed ESD protective bag has been opened, all die should be stored in a dry nitrogen environment. Cleanliness: Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid cleaning systems. Static Sensitivity: Follow ESD precautions to protect against > ± 250V ESD strikes. Transients: Suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias cables to minimize inductive pick-up. General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the chip has fragile air bridges and should not be touched with vacuum collet, tweezers, or fingers. Mounting The chip is back-metallized and can be die mounted with electrically conductive epoxy. The mounting surface should be clean and flat. Epoxy Die Attach: Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed around the perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer’s schedule. Wire Bonding Ball or wedge bond with 0.025mm (1 mil) diameter pure gold wire. Thermosonic wirebonding with a nominal stage temperature of 150 deg. C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Use the minimum level of ultrasonic energy to achieve reliable wirebonds. Wirebonds should be started on the chip and terminated on the package or substrate. All bonds should be as short as possible <0.31mm (12 mils). 3 - 14 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC543 v01.0507 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Notes PHASE SHIFTERS - CHIP 3 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 3 - 15