HITTITE HMC-C039

HMC-C039
v02.1007
CONNECTORIZED MODULES - FREQUENCY DIVIDERS
12
Features
Ultra Low SSB Phase Noise: -150 dBc/Hz
Wide Bandwidth
Output Power: -1 dBm
Single DC Supply: +5V @ 80mA
Typical Applications
Prescaler for 0.5 to 18 GHz PLL Applications:
• Point-to-Point / Multi-Point Radios
• VSAT Radios
RoHS Compliant Hermetically Sealed Module
Field Replaceable SMA Connectors
-55 to +85 °C Operating Temperature
General Description
• Fiber Optic
• Test Equipment
• Military & Space
Functional Diagram
The HMC-C039 is a low noise Divide-by-5 Static
Divider utilizing InGaP GaAs HBT technology packaged in a miniature, hermetic module with replacable
SMA connectors. This device operates from 0.5 to
8GHz input frequency from a single +5V DC supply.
The low additive SSB phase noise of -155 dBc/Hz
at 100 kHz offset helps the user maintain excellent
system noise performance.
Electrical Specifi cations, TA = +25° C, 50 Ohm System, Vdc= +5V
Parameter
Conditions
Maximum Input Frequency
Minimum Input Frequency
Input Power Range
Min.
Typ.
8
9
Sine Wave Input
Max.
Units
GHz
0.5
GHz
Fin = 0.5 to 7 GHz
-20
-15
+15
dBm
Fin = 7 to 8 GHz
-20
-15
+10
dBm
Output Power
Fin = 0.5 to 8 GHz
-4
-1
dBm
Reverse Leakage
Fin = 0.5 to 8 GHz
58
dB
Pin = 0 dBm, Fin = 4.8 GHz
-155
dBc/Hz
Pin = 0 dBm, Fout = 882 MHz
100
ps
80
mA
SSB Phase Noise (100 kHz offset)
Output Transition Time
Supply Current (Idc)
12 - 14
DIVIDE-BY-5 PRESCALER
MODULE, 0.5 - 8.0 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC-C039
v02.1007
DIVIDE-BY-5 PRESCALER
MODULE, 0.5 - 8.0 GHz
20
15
15
10
10
5
Recommended
Operating Window
-5
-10
-15
5
-5
-10
-15
-20
-20
-25
-25
-30
Min Pin +25C
Max Pin +25C
Min Pin +85C
Max Pin +85C
Min Pin -55C
Max Pin -55C
0
-30
0
1
2
3
4
5
6
7
8
0
9
1
2
INPUT FREQUENCY (GHz)
0
-20
SSB PHASE NOISE (dBc/Hz)
OUTPUT POWER (dBm)
0
-1
-2
-3
-4
+25C
+85C
-55C
-6
5
6
7
8
9
-40
-60
-80
-100
-7
-120
-8
-140
-9
-10
0
1
2
3
4
5
6
7
8
9
-160
2
10
3
4
10
INPUT FREQUENCY (GHz)
5
10
6
10
7
10
10
OFFSET FREQUENCY (Hz)
Output Harmonic Content,
Pin= 0 dBm, T= 25 °C
Reverse Leakage, Pin= 0 dBm, T= 25 °C
0
0
-10
OUTPUT LEVEL (dBm)
-10
OUTPUT LEVEL (dBm)
4
SSB Phase Noise Performance,
Pin= 0 dBm, T= 25 °C
Output Power vs. Temperature
-5
3
INPUT FREQUENCY (GHz)
-20
-30
-40
Pfeedthru
2nd Harmonic
3rd Harmonic
-50
-20
-30
-40
CONNECTORIZED MODULES - FREQUENCY DIVIDERS
20
0
12
Input Sensitivity vs. Temperature
INPUT POWER (dBm)
INPUT POWER (dBm)
Input Sensitivity Window, T= 25 °C
-50
-60
-70
-60
-80
0
1
2
3
4
5
6
INPUT FREQUENCY (GHz)
7
8
9
0
1
2
3
4
5
6
7
8
9
INPUT FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 15
HMC-C039
v02.1007
DIVIDE-BY-5 PRESCALER
MODULE, 0.5 - 8.0 GHz
12 - 16
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
AMPLITUDE (mV)
CONNECTORIZED MODULES - FREQUENCY DIVIDERS
12
Absolute Maximum Ratings
200
Supply Voltage (Vdc)
150
RF Input (Vdc = +5V)
+13 dBm
100
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85 °C
50
+5.5V
0
-50
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
-100
-150
-200
23
23.2 23.4 23.6 23.8
24
24.2 24.4 24.6 24.8
25
Typical Supply Current vs. Vdc
TIME (nS)
Vdc
Idc (mA)
4.75
74
5.0
80
5.25
86
Note: Divider will operate over full voltage range shown above
Pin Description
Pin Number
Function
Description
1
RFIN &
RF Ground
RF input connector, SMA female, field replaceable.
RF Input is AC coupled.
2
RFOUT &
RF Ground
RF output connector, SMA female, field replaceable.
Divided output is AC coupled.
3
Vdc
Supply voltage 5V ± 0.25V.
4
GND
Power supply ground.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC-C039
v02.1007
DIVIDE-BY-5 PRESCALER
MODULE, 0.5 - 8.0 GHz
NOTES:
Package Information
Package Type
C-1
Package Weight [1]
10.2 gms [2]
Spacer Weight
N/A
[1] Includes the connectors
[2] ±1 gms Tolerance
CONNECTORIZED MODULES - FREQUENCY DIVIDERS
12
Outline Drawing
1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™
2. BRACKET MATERIAL: ALUMINUM
3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER
ELECTROLYTIC NICKEL 75 MICROINCHES MIN.
4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. TOLERANCES ±.005 [0.13] UNLESS OTHERWISE SPECIFIED.
6. FIELD REPLACEABLE SMA CONNECTORS.
TENSOLITE 5602 - 5CCSF OR EQUIVALENT.
7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80
HARDWARE WITH DESIRED MOUNTING SCREWS.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
12 - 17