KBJ20005 thru KBJ2010 REVERSE VOLTAGE FORWARD CURRENT SILICON BRIDGE RECTIFIERS - 50 to 1000Volts - 20 Amperes KBJ FEATURES ●Rating to 1000V PRV ? .134(3.4) ? .122(3.1) ●Ideal for printed circuit board .213(5.4) .197(5.0) .173(4.4) .157(4.0) 1.193(30.3) 1.169(29.7) ●Low forward voltage drop,high current capability classification 94V-0 ~ ~ _ .165(4.2) .142(3.6) .708(18.0) .669(17.0) .106(2.7) .096(2.3) .094(2.4) .075(1.9) .043(1.1) .035(0.9) + ? .134(3.4) ? .122(3.1) ●The plastic material has UL flammability .441(11.2) .425(10.8) technique results in inexpensive product .198 (5.1) .800(20.3) .776(19.7) ●Reliable low cost construction utilizing molded plastic .114(2.9) .098(2.5) .031(0.8) .023(0.6) .402(10.2) .303(7.7).303(7.7) SPACING .386(9.8) .287(7.3).287(7.3) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL KBJ 20005 KBJ 2001 KBJ 2002 KBJ 2004 KBJ 2006 KBJ 2008 KBJ 2010 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 30 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V CHARACTERISTICS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (with heatsink Note 2) @ TC=100℃ (without heatsink) 20.0 I(AV) 3.6 A Peak Forward Surage Current 8.3ms Single Half Sine-Wave IFSM 300 A VF 1.1 V Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 10.0A DC Maximum DC Reverse Current @ TJ=25℃ at Rated DC Blocking Voltage @ TJ=125℃ 10 IR 500 uA I2t Rating for Fusing (t<8.3ms) I2t 240 A2s Typical Junction Capacitance Per Element (Note1) CJ 60 pF RθJC 0.8 ℃/W TJ -55 to +125 ℃ TSTG -55 to +150 ℃ Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 300mm*300mm*1.6mm cu plate heatsink. ~ 265 ~ RATING AND CHARACTERTIC CURVES KBJ20005 thru KBJ2010 FIG.2-MAXMUN NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT , AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 15 WITH HEATSINK 12 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 9 6 WITHOUT HEATSINK 3 0 0 20 40 60 100 80 120 140 350 300 250 T J=150℃ SINGLE -SINE- WAVE (JEDEC METHOD) 200 150 100 Single Half-Sine- Wave (JEDEC METHOD) 50 0 1 2 20 50 100 NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE, °C FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT, (A) 100 10 T J=25℃,f=1MHZ 10 1.0 T J = 25℃ PULSE WIDTH 300us 0.1 1.0 1.0 10.0 0.01 100 0 0.2 REVERSE VOLTAGE,(VOLTS) 0.4 1000 T J=125℃ 100 T J=100℃ 10 T J=50℃ 1.0 T J=25℃ 0.1 0 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE,(pF) 10 5 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) ~ 266 ~ 1.8