ETC ATH100KL2

Analog Technologies
High Stability Thermistor Assembly
ATH10KL2
Lead Diameter:
0.15mm
Lead Length:
60 ± 3mm
3.6
φ2.4
0.5
8.1
8.1
φ1.9
φ1.9
63
φ0.15
Bare copper wire
Figure 1 The Front and Side Views of ATH10KL2
APPLICATION
MAIN FEATURES
Glass Encapsulated for Long Term Stability & Reliability
High Stability: <0.1°C/Y
High Resistance Accuracy: 1%
Wide Temp. Range: −55°C to 250°C
Packaged in Extra Small Ring Lug
APPLICATIONS
Use #2 imperial or M2.5 metric screw to mount the
thermistor assembly onto a smooth metal surface of the
object for which the temperature needs to be measured.
The thermistor lead wires are made of plain copper, make
sure that they do not touch each other, nor any other
electrically conductive objects.
For high precision applications, use a cover which is made of
thermal isolation material to cover the thermistor area, see
Figure 2. In this way, the air flow will not affect the
temperature sensing accuracy.
Object
Temperature sensing for laser diodes, optical components, etc.
Cover
DESCRIPTION
The ATH10KL2 is a thermistor assembly with a glass
encapsulated thermistor packaged in an extra compact ring
lug. Comparing with conventional assemblies containing
epoxy encapsulated thermistors, ATH10KL2 presents higher
long term stability, higher reliability and wider temperature
range. In addition, it has a small size and short response time.
The ATH10KL2 can be used to measure the temperatures of
laser diodes, optical components, etc., with high accuracy and
long term stability.
SPECIFICATIONS
Nominal Resistance @ 25°C: 10K ± 1%
B Value @ 25°C/85°C:
3480K ± 1%
B Value @ 0°C/100°C:
3450K ± 1%
B Value @ 25°C/100°C:
3497K ± 1%
Ring Lug Length:
8.1mm ± 0.1mm
Ring Lug Width:
3.6 ± 0.1mm
Ring Hole Diameter:
2.4 ± 0.1mm
Figure 2 Using an Insulation Cover to Improve Accuracy
ORDERING INFORMATION
Part number: ATH10KL2
Quantity
1-9
10 - 49
50 - 249
≥250
Price
$9.6
$8.2
$6.4
$4.8
5 50 E. Weddell Drive, Suit e 4, Sunnyvale, CA 94 08 9, U. S. A. Tel.: (4 08 ) 7 47 -9 76 0, Fax: (40 8) 74 7-97 70 , W eb: w w w .analogt echnologies.com
© Copyrights 2000 – 2005, Analog Technologies, Inc. All Rights Reserved.
1
Analog Technologies
High Stability Thermistor Assembly
ATH10KL2
Resistance Temperature Characteristics
NOTICE
1.
ATI warrants performance of its products for one year to the specifications applicable at the time of sale, except for those being damaged by excessive
abuse. Products found not meeting the specifications within one year from the date of sale can be exchanged free of charge.
2.
ATI reserves the right to make changes to its products or to discontinue any product or service without notice, and advise customers to obtain the latest
version of relevant information to verify, before placing orders, that information being relied on is current and complete.
3.
All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty,
patent infringement, and limitation of liability. Testing and other quality control techniques are utilized to the extent ATI deems necessary to support this
warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.
4.
Customers are responsible for their applications using ATI components. In order to minimize risks associated with the customers’ applications, adequate
design and operating safeguards must be provided by the customers to minimize inherent or procedural hazards. ATI assumes no liability for applications
assistance or customer product design.
5.
ATI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of ATI covering or relating to any combination, machine, or process in which such products or services might be or are used.
ATI’s publication of information regarding any third party’s products or services does not constitute ATI’s approval, warranty or endorsement thereof.
6.
IP (Intellectual Property) Ownership: ATI retains the ownership of full rights for special technologies and/or techniques embedded in its products, the
designs for mechanics, optics, plus all modifications, improvements, and inventions made by ATI for its products and/or projects.
5 50 E. Weddell Drive, Suit e 4, Sunnyvale, CA 94 08 9, U. S. A. Tel.: (4 08 ) 7 47 -9 76 0, Fax: (40 8) 74 7-97 70 , W eb: w w w .analogt echnologies.com
© Copyrights 2000 – 2005, Analog Technologies, Inc. All Rights Reserved.
2