ETC CM1117AGSCM89

CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
GENERAL DESCRIPTION
FEATURES
The CM1117A is a series of low dropout three-terminal
Low Dropout Voltage: 1.1V at 600mA output Current.
regulators with a dropout of 1.1V at 600mA output current.
Output Noise from 10Hz to 10KHz: 0.003%
PSRR at Io = 300mA and f =120Hz: 75dB
± 1%
These products have been optimized for low voltage where
Output Voltage Accuracy:
transient response and minimum input voltage are critical.
On-Chip Thermal Shutdown
These CM1117A provide current limit and thermal shutdown.
Maximum Quiescent Current: IQMAX =5mA
Its circuit includes a trimmed band-gap reference to assure
ESD (Human Body Model): 3.5KV
± 1%. On –chip thermal
output voltage accuracy to be within
Operation Junction Temperature –40 to 125℃
shutdown provides protection against any combination of
overload and ambient temperatures that would create
excessive junction temperatures.
The CM1117A is available in 2.5V and 3.3V versions. The
fixed versions integrate the adjust resistors. It is also available
in an adjustable version which can set the output voltage with
two external resistors.
APPLICATIONS
DVD/CD-ROM
USB Device
Add-on Card
DVD Player
PC Motherboard
PIN CONFIGURATION
GND/ADJ
OUTPUT
INPUT
SOT-89
Front View
1
2
3
Figure 1. Package Types of CM1117A
2005/07/12 Preliminary
Champion Microelectronic Corporation
Page 1
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
ORDERING INFORMATION
Package Type
Operating Temperature
SOT-89
Range (TA)
CM1117AKCM89
0℃ ~ +70℃
2.5V
CM1117ASCM89
0℃ ~ +70℃
3.3V
CM1117ACM89
0℃ ~ +70℃
ADJ.
CM1117AGKCM89
0℃ ~ +70℃
2.5V
CM1117AGSCM89
0℃ ~ +70℃
3.3V
CM1117AGCM89
0℃ ~ +70℃
ADJ.
Output Voltage
*Note: G : Suffix for Pb Free Product
BLOCK DIAGRAM
Figure 2. Functional Block Diagram of CM1117A
2005/07/12 Preliminary
Champion Microelectronic Corporation
Page 2
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
ABSOLUTE MAXIMUM RATINGS (Note 1)
Parameter
Symbol
Value
Unit
Input Voltage
VIN
15
V
Operating Junction Temperature Range
TJ
150
℃
Storage Temperature Range
TSTG
-65 to 150
℃
Lead Temperature (Soldering, 10sec)
TLEAD
300
℃
ESD (Human Body Model)
ESD
3500
V
ESD (Machine Model)
ESD
400
V
Note 1: Stresses greater than those listed under ”Absolute Maximum Ratings” may cause permanent damage to the
device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those indicated under “ Recommended Operating Conditions” is not implied. Exposure to “Absolute Maximum
Ratings” for extended periods may affect device reliability.
RESOMMENDED OPERATING CONDITIONS
Parameter
Input Voltage
Operating Junction Temperature Range
Storage Temperature Range
2005/07/12 Preliminary
Symbol
VIN
Min.
TJ
TSTG
-40
-65
Champion Microelectronic Corporation
Max
12
125
150
Units
V
Page 3
℃
℃
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
ELECTRICAL CHARACTERISTICS
Operating Conditions: VIN ≤ 10V, TJ =25 ℃ ,unless otherwise specified. (P ≤ maximum power dissipation) Limit
appearing in Boldface type apply over the entire junction temperature range for operation, -40℃ to 125℃
Parameter
Symbol
Reference Voltage
VREF
Test Conditions
CM1117A-ADJ IOUT = 10mA, VIN= VOUT 2V, TJ=25℃
Output Voltage
VOUT
10mA ≤ IOUT ≤ 600mA, 1.4V ≤ VIN - VOUT ≤ 8V
P ≤ maximum power dissipation
CM1117A-2.5 IOUT = 10mA, VIN= 4.5V, TJ=25℃
10mA ≤ IOUT ≤ 600mA, 3.9V ≤ VIN ≤ 10V
CM1117A-3.3 IOUT = 10mA, VIN= 5.0V, TJ=25℃
10mA ≤ IOUT ≤ 600mA, 4.75V ≤ VIN ≤ 10V
CM1117A
Min.
Typ.
Max.
1.238
1.250
1.262
V
1.225
1.250
1.270
2.475
2.5
2.525
2.450
2.5
2.550
3.267
3.3
3.333
3.235
3.3
3.365
0.035
0.2
%
1.0
6.0
mV
1.0
6.0
mV
0.20
0.40
%
1.0
10.0
mV
1.0
10.0
mV
1.1
1.3
CM1117A-ADJ
IOUT = 10mA, 1.5V ≤ VIN - VOUT
Line Regulator
∆
VOUT
≤ 10V
CM1117A-3.3
IOUT = 10mA, 1.5V ≤ VIN - VOUT ≤ 10V
CM1117A-2.5
IOUT = 10mA, 1.5V ≤ VIN - VOUT ≤ 10V
CM1117A-ADJ
(VIN= VOUT) = 2V, 10mA ≤ IOUT ≤ 600mA
Load Regulation
∆
VOUT
CM1117A-3.3
(VIN= VOUT) = 2V, 10mA ≤ IOUT ≤ 600mA
CM1117A-2.5
(VIN= VOUT) = 2V, 10mA ≤ IOUT ≤ 600mA
∆ VREF =1% , IOUT = 0.6A
Dropout Voltage
Current Limit
ILIMIT
(VIN – VOUT ) = 2V
0.75
Adjust Pin Current
Adjust Pin Current
Change
Minimum Load Current
Quiescent Current
5.0
1.5V ≤ (VIN - VOUT) ≤ 10V(ADJ only)
1.7
5.0
mA
5.0
mA
75
dB
0.5
%
0.3
%
0.003
%
150
℃
25
℃
SOT-89
100
SOT-223
33
℃/W
℃/W
TA = 125℃, 1000hrs.
RMS Output Noise
TA = 25℃, 10Hz ≤ f ≤ 10KHz
Junction Temperature
Thermal Shutdown
Hysteresis
(Junction to case)
2005/07/12 Preliminary
µA
0.2
Long-Term Stability
θ JC
V
A
1.4V ≤ (VIN - VOUT) ≤ 10V, 10mA ≤ IOUT ≤ 600mA
(VIN – VOUT )= 3V, IOUT =300 mA
Thermal Shutdown
V
120
f = 120Hz, COUT =22 µ F Tantalum
(% of VOUT )
V
60
Temperature Stability
Thermal Resistance
0.9
VIN= VOUT + 1.25V
Ripple Rejection
Unit
Champion Microelectronic Corporation
60
Page 4
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
APPLICATION CIRCUIT
VIN=11V
CM1117A-ADJ
IN
9V at 0.6A
OUT
ADJ
10uF
Tantalum
R1
22uF
Tantalum
R2
VOUT = VREF * (1+R2/R1) + IADJ *R2
VIN=5.3V
CM1117A-3.3
IN
OUT
GND
10uF
Tantalum
3.3V at 0.6A
22uF
Tantalum
Figure 3. Typical Applications of CM1117A
2005/07/12 Preliminary
Champion Microelectronic Corporation
Page 5
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
TYPICAL PERFORMANCE CHARACTERISTICS
2005/07/12 Preliminary
Champion Microelectronic Corporation
Page 6
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
TYPICAL PERFORMANCE CHARACTERISTICS (CONTINUED)
2005/07/12 Preliminary
Champion Microelectronic Corporation
Page 7
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
PACKAGE DIMENSION
SOT-89 (M89)
D
D1
A
L
5°
H
E
φ1.0
e
C
e1
A
8°
L
b
b1
C
D
D1
H
E
e1
b
2005/07/12 Preliminary
b1
b
e
Champion Microelectronic Corporation
Page 8
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
IMPORTANT NOTICE
Champion Microelectronic Corporation (CMC) reserves the right to make changes to its products or to discontinue any integrated
circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify,
before placing orders, that the information being relied on is current.
A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe property or
environmental damage. CMC integrated circuit products are not designed, intended, authorized, or warranted to be suitable for
use in life-support applications, devices or systems or other critical applications. Use of CMC products in such applications is
understood to be fully at the risk of the customer.
In order to minimize risks associated with the customer’s applications, the
customer should provide adequate design and operating safeguards.
HsinChu Headquarter
Sales & Marketing
5F, No. 11, Park Avenue II,
Science-Based Industrial Park,
HsinChu City, Taiwan
T E L : +886-3-567 9979
F A X : +886-3-567 9909
11F, No. 306-3, SEC. 1, Ta Tung Road,
Hsichih, Taipei Hsien 221, Taiwan
2005/07/12 Preliminary
T E L : +886-2-8692 1591
F A X : +886-2-8692 1596
Champion Microelectronic Corporation
Page 9