CHAMP CM1117AGKCM89

CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
GENERAL DESCRIPTION
FEATURES
The CM1117A is a series of low dropout three-terminal
‹
Low Dropout Voltage: 1.1V at 600mA output Current.
regulators with a dropout of 1.1V at 600mA output current.
‹
Output Noise from 10Hz to 10KHz: 0.003%
‹
PSRR at Io = 300mA and f =120Hz: 75dB
These products have been optimized for low voltage where
‹
Output Voltage Accuracy:
transient response and minimum input voltage are critical.
‹
On-Chip Thermal Shutdown
± 1%
These CM1117A provide current limit and thermal shutdown.
‹
Maximum Quiescent Current: IQMAX =5mA
Its circuit includes a trimmed band-gap reference to assure
‹
ESD (Human Body Model): 3.5KV
‹
Operation Junction Temperature –40 to 125℃
± 1%. On –chip thermal
output voltage accuracy to be within
shutdown provides protection against any combination of
overload and ambient temperatures that would create
excessive junction temperatures.
The CM1117A is available in 2.5V and 3.3V versions. The
fixed versions integrate the adjust resistors. It is also available
in an adjustable version which can set the output voltage with
two external resistors.
APPLICATIONS
‹
DVD/CD-ROM
‹
USB Device
‹
Add-on Card
‹
DVD Player
‹
PC Motherboard
PIN CONFIGURATION
GND/ADJ
OUTPUT
INPUT
SOT-89
Front View
1
2
3
Figure 1. Package Types of CM1117A
2006/10/11 Rev1.4
Champion Microelectronic Corporation
Page 1
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
ORDERING INFORMATION
Package Type
Operating Temperature
SOT-89
Range (TA)
CM1117AKCM89
0℃ ~ +85℃
2.5V
CM1117ASCM89
0℃ ~ +85℃
3.3V
CM1117ACM89
0℃ ~ +85℃
ADJ.
CM1117AGKCM89
0℃ ~ +85℃
2.5V
CM1117AGSCM89
0℃ ~ +85℃
3.3V
CM1117AGCM89
0℃ ~ +85℃
ADJ.
Output Voltage
*Note: G : Suffix for Pb Free Product
BLOCK DIAGRAM
Figure 2. Functional Block Diagram of CM1117A
2006/10/11 Rev1.4
Champion Microelectronic Corporation
Page 2
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
ABSOLUTE MAXIMUM RATINGS (Note 1)
Parameter
Symbol
Value
Unit
Input Voltage
VIN
15
V
Operating Junction Temperature Range
TJ
150
℃
Storage Temperature Range
TSTG
-65 to 150
℃
Lead Temperature (Soldering, 10sec)
TLEAD
300
℃
ESD (Human Body Model)
ESD
3500
V
ESD (Machine Model)
ESD
400
V
Note 1: Stresses greater than those listed under ”Absolute Maximum Ratings” may cause permanent damage to the
device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those indicated under “ Recommended Operating Conditions” is not implied. Exposure to “Absolute Maximum
Ratings” for extended periods may affect device reliability.
RESOMMENDED OPERATING CONDITIONS
Parameter
Input Voltage
Operating Junction Temperature Range
Storage Temperature Range
2006/10/11 Rev1.4
Symbol
VIN
Min.
TJ
TSTG
-40
-65
Champion Microelectronic Corporation
Max
12
125
150
Units
V
Page 3
℃
℃
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
ELECTRICAL CHARACTERISTICS
≤ 10V, TJ =25 ℃ ,unless otherwise specified. (P ≤ maximum power dissipation) Limit
appearing in Boldface type apply over the entire junction temperature range for operation, -40℃ to 125℃
Operating Conditions: VIN
Parameter
Symbol
Reference Voltage
VREF
Test Conditions
CM1117A-ADJ IOUT = 10mA, VIN= VOUT 2V, TJ=25℃
Output Voltage
VOUT
10mA ≤ IOUT ≤ 600mA, 1.4V ≤ VIN - VOUT ≤ 8V
P ≤ maximum power dissipation
CM1117A-2.5 IOUT = 10mA, VIN= 4.5V, TJ=25℃
10mA ≤ IOUT ≤ 600mA, 3.9V ≤ VIN ≤ 10V
CM1117A-3.3 IOUT = 10mA, VIN= 5.0V, TJ=25℃
10mA ≤ IOUT ≤ 600mA, 4.75V ≤ VIN ≤ 10V
CM1117A
Min.
Typ.
Max.
1.238
1.250
1.262
V
1.225
1.250
1.270
2.475
2.5
2.525
2.450
2.5
2.550
3.267
3.3
3.333
3.235
3.3
3.365
0.035
0.2
%
1.0
6.0
mV
1.0
6.0
mV
0.20
0.40
%
1.0
10.0
mV
1.0
10.0
mV
1.1
1.3
V
CM1117A-ADJ
IOUT = 10mA, 1.5V ≤ VIN - VOUT
Line Regulator
Δ
VOUT
≤ 10V
CM1117A-3.3
IOUT = 10mA, 1.5V ≤ VIN - VOUT ≤ 10V
CM1117A-2.5
IOUT = 10mA, 1.5V ≤ VIN - VOUT ≤ 10V
CM1117A-ADJ
(VIN= VOUT) = 2V, 10mA ≤ IOUT ≤ 600mA
Load Regulation
Δ
VOUT
CM1117A-3.3
(VIN= VOUT) = 2V, 10mA ≤ IOUT ≤ 600mA
CM1117A-2.5
(VIN= VOUT) = 2V, 10mA ≤ IOUT ≤ 600mA
Δ VREF =1% , IOUT = 0.6A
Dropout Voltage
Current Limit
ILIMIT
(VIN – VOUT ) = 2V
0.75
Adjust Pin Current
Adjust Pin Current
Change
Minimum Load Current
Quiescent Current
5.0
1.5V ≤ (VIN - VOUT) ≤ 10V(ADJ only)
1.7
5.0
mA
5.0
mA
75
dB
0.5
%
0.3
%
0.003
%
150
℃
25
℃
SOT-89
100
SOT-223
33
℃/W
℃/W
TA = 125℃, 1000hrs.
RMS Output Noise
TA = 25℃, 10Hz ≤ f ≤ 10KHz
Junction Temperature
Thermal Shutdown
Hysteresis
2006/10/11 Rev1.4
θ JC
μA
0.2
Long-Term Stability
(Junction to case)
A
1.4V ≤ (VIN - VOUT) ≤ 10V, 10mA ≤ IOUT ≤ 600mA
(VIN – VOUT )= 3V, IOUT =300 mA
Thermal Shutdown
V
120
f = 120Hz, COUT =22 μ F Tantalum
(% of VOUT )
V
60
Temperature Stability
Thermal Resistance
0.9
VIN= VOUT + 1.25V
Ripple Rejection
Unit
Champion Microelectronic Corporation
60
Page 4
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
APPLICATION CIRCUIT
VIN=11V
CM1117A-ADJ
IN
9V at 0.6A
OUT
ADJ
10uF
Tantalum
R1
22uF
Tantalum
R2
VOUT = VREF * (1+R2/R1) + IADJ *R2
VIN=5.3V
CM1117A-3.3
IN
GND
10uF
Tantalum
3.3V at 0.6A
OUT
22uF
Tantalum
Figure 3. Typical Applications of CM1117A
2006/10/11 Rev1.4
Champion Microelectronic Corporation
Page 5
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
TYPICAL PERFORMANCE CHARACTERISTICS
2006/10/11 Rev1.4
Champion Microelectronic Corporation
Page 6
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
TYPICAL PERFORMANCE CHARACTERISTICS (CONTINUED)
2006/10/11 Rev1.4
Champion Microelectronic Corporation
Page 7
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
PACKAGE DIMENSION
SOT-89 (M89)
D
D1
A
L
5°
H
E
φ1.0
e
C
e1
A
8°
L
b
b1
C
D
D1
H
E
e1
b
2006/10/11 Rev1.4
b1
b
e
Champion Microelectronic Corporation
Page 8
CM1117A
600mA LOW DROPOUT VOLTAGE REGULATOR
IMPORTANT NOTICE
Champion Microelectronic Corporation (CMC) reserves the right to make changes to its products or to discontinue any integrated
circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify,
before placing orders, that the information being relied on is current.
A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe property or
environmental damage. CMC integrated circuit products are not designed, intended, authorized, or warranted to be suitable for
use in life-support applications, devices or systems or other critical applications. Use of CMC products in such applications is
understood to be fully at the risk of the customer.
In order to minimize risks associated with the customer’s applications, the
customer should provide adequate design and operating safeguards.
HsinChu Headquarter
Sales & Marketing
5F, No. 11, Park Avenue II,
Science-Based Industrial Park,
HsinChu City, Taiwan
T E L : +886-3-567 9979
F A X : +886-3-567 9909
7F-6, No.32, Sec. 1, Chenggong Rd., Nangang
District, Taipei City 115, Taiwan
2006/10/11 Rev1.4
T E L : +886-2-2788 0558
F A X : +886-2-2788 2985
Champion Microelectronic Corporation
Page 9