IA.qxd 6/6/03 4:13 pm Page 1 DC/DC Converters 1 Watt XPiQ inc. IA Series Intelligent Design Quality Product • 0.18 in2 Board Space • 80% Efficiency • 15 Watts per in3 • 5, 12, 24 and 48 VDC Inputs • 1000 VDC Isolation • Industry Standards Pinouts Specification Input Environmental Input Voltage • Input Reflected Noise • (20 MHz) BW ±10% 100mV pk-pk max Output Output Voltage • Accuracy Output Ripple & Noise • (20 MHz BW) Line Regulation • Load Regulation • (20% to 100% Load) ±5% Input Output Isolation Temperature Coefficient Operating Temperature Range Storage Temperature Range • • 1000 VDC min 0.03%/°C max • -40 °C to +85 °C • -55 °C to +125 °C 75 mV pk-pk max 1.2%/1% of Vin ±10% General Efficiency • Short Circuit Protection • At full load 9V, 12V & 15V outputs 80% typical At full load 3.3 V & 5 V outputs 70% typical 1 second max • www.XPiQ.com PH: 508 429.9883 FAX: 800 226.2100 Email: [email protected] Holliston, MA 01746 USA • IA.qxd 6/6/03 4:13 pm Page 2 OUTPUT VOLTAGE & CURRENT RATINGS Output Voltage(s) ±3.3 VDC ±5.0 VDC ±9.0 VDC ±12.0 VDC ±15.0 VDC Output Current(s) ±150 mA ±100 mA ±55 mA ±42 mA ±33 mA IA 5 VDC Input IA0503 IA0505 IA0509 IA0512 IA0515 12 VDC Input IA1203 IA1205 IA1209 IA1212 IA1215 24 VDC Input IA2403 IA2405 IA2409 IA2412 IA2415 48 VDC Input IA4803 IA4805 IA4809 IA4812 IA4815 Add suffix “S” for single-in-line package, suffix “D” for dual-in-line package. Mechanical Details Single-In-Line Package Dual-In-Line-Package 0.240 MAX* 0.400 MAX 0.780 MAX 0.800 MAX 0.015 0.400 MAX 0.310 MAX 0.110 MIN 0.120 MIN 0.100 0.300 0.045 BOTTOM 0.300 TYP 0.010 0.010 MAX 0.500 0.18 0.600 *0.280 for 48 Vin version Pins .01 x .02 inches Pin Connections Vcc 14 1 1 2 Vcc GND 4 -V 5 6 0V +V GND -V 11 +V 0V 9 8 7 NC Derating Curve www.XPiQ.com PH: 508 429.9883 FAX: 800 226.2100 Email: [email protected] Holliston, MA 01746 USA