ETC PT506

PRODUCT SPECIFICATION
®
PT506-24DT Series Control
PAN/TILT AND ZOOM LENS FUNCTIONS, MULTIPLE LOCATIONS
8
Product Features
• Desktop Models; can be Rack Mounted
CONTROLS
• For use with 24 VAC Pan/Tilts
• When used with RB115 Allow Control of
120 VAC Pan/Tilts
• Controls up to Six (6) Pan/Tilts and Zoom
Lenses
PT506-24DT
• Optional Auto/Random Scan Operation
SHORT DISTANCE, HARD-WIRE
The PT506-24DT is a Pan/Tilt and Lens
control for 24 VAC pan/tilts which combines
zoom lens and pan/tilt control functions for
up to six (6) locations into one economical
unit.
Easy to use panel switches provide fingertip
control of zoom, focus, iris, and lens speed
functions, with push button selection of up to
6 sites, and joystick control of the pan/tilt.
When used with the RB115 relay box, the
control can be used with 120 VAC pan/tilts
(one relay box required for each pan/tilt).
The PT506-24A provides cost-saving auto/
random scan control, which increases
equipment life and system effectiveness.
Both models are desktop units. Optional rack
mounting is available by using the R350
Rack Mount Kit.
PT506-24DT DIMENSION DRAWING
DataFAX Documents
SPEC: 2580
MANUAL: 25806
A&E: SEE DATAFAX CATALOG #3
C580/REVISED 8-97
261
TECHNICAL SPECIFICATIONS
®
MODELS
PT506-24DT
8
CONTROLS
PT506-24DT/220
PT506-24A
PT506-24A/220
Multiple position desktop joystick
control for up to six (6) 24 VAC
pan/tilts and zoom lenses. For use
with PT175-24P, PT180-24P,
PT180-24SL, PT270-24P,
PT280-24P, PT280-24SL,
PT480-24P series, PT570-24P,
PT680-24P, PT680-24SL, and
PT780-24P series
Same as PT506-24DT except 230
VAC input/24 VAC pan/tilt output
Desktop auto/random scan control;
interfaces with PT506-24DT
Desktop auto/random scan control;
interfaces with PT506-24DT/220
CONTROLS
SHORT DISTANCE, HARD-WIRE
PT506-24DT
Pan/Tilt Selection
Pan/Tilt
Zoom
Focus
Iris
Lens Speed
ON/OFF
Pilot Lamp
PT506-24A
ON/OFF
Auto/Random Scan
6 latching, illuminated push buttons
8-position joystick (Up, down, left,
right and simultaneous combinations of pan/tilt functions when
joystick is positioned diagonally
between two functions)
Paddle switch, TELE/WIDE
Paddle switch, NEAR/FAR
Paddle switch, OPEN/CLOSE
Potentiometer
Rocker switch
Light emitting diode
Rocker switch
6 rocker switches (one for each
pan/tilt); 2 operational positions
(AUTO/RANDOM and MANUAL)
PT506-24A
Power Requirements
Protection
Power Cord
GENERAL
Construction
Panel
Cover
Chassis
Temperature Range
Size
Weight
PT506-24DT/
PT506-24DT/220
PT506-24A
PT506-24A/220
Shipping Weight
PT506-24DT/
PT506-24DT/220
PT506-24A
PT506-24A/220
Power Requirements
Cable Requirements
Connectors
Fuse Protection
Power Cord
120 or 230 VAC, 60 Hz
Pan/Tilt — 24 VAC, 60 Hz
Lens
— 0 to ±9 VDC
1.65 amps (190 vA)
11 conductors
(Pan/tilt 5 + ground; Lens 4 + ground)
AMP CPC type, 14-pin (mate supplied)
3 AG type, 1 ASB
3-wire grounded
Aluminum
Steel, black polyester powder coat
Steel, galvanized
Indoor; 32° to 120°F
(0° to 48.89°C)
See dimension drawings
13 lb 6 oz. (6 kg)
18 lb (8.1 kg)
17 lb (7.70 kg)
15 lb (6.79 kg)
19 lb (8.5 kg)
18 lb (8.1 kg)
CERTIFICATIONS
◆ CE compliant (PT506-24DT/220 and PT506-24A/220 only)
OPTIONAL ACCESSORIES
C06HWC
R350
RB115
ELECTRICAL
PT506-24DT
Input Voltage
Output Voltage
1.04 amps (120 vA)
3 AG, 2 amps
3-wire grounded
RB24
Pre-wired, 6-foot (1.82 m)
interconnecting cable with 14-pin
control connector and butt splices on
mating end (one required for each
pan/tilt)
Rack mount kit (one required for
each unit). (See C965 spec)
Relay box for 120 VAC pan/tilts.
Allows control to be used with 120
VAC pan/tilts (one required for
each pan/tilt). Extends operating
distance (control to relay box) to
13,000 feet utilizing 16 Awg.
(See C915 spec)
Same as RB115 except for use with
24 VAC pan/tilts. (See C915 spec)
PT506-24A
Specifications subject to change without notice.
©Copyright 1997, PELCO. All rights reserved.
262
Pelco • 300 West Pontiac Way • Clovis, CA 93612-5699 • Pelco Online @ http://www. pelco.com
In the US and Canada: Tel (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108
International Customers: Tel (1-209) 292-1981 • FAX (1-209) 348-1120 • DataFAX (1-209) 292-0435