Coaxial Terminations General Notes: 1. Resistance Tolerance: Standard tolerance is ± 5%. 2. Mechanical Tolerance: ± 0.010 unless otherwise specified. 3. Custom mechanical configurations available upon request. 4. All connectors are female, unless otherwise requested. 5. All dimensions are in inches. Power Derating: RF Power terminations can be derated for flange temperatures up to 150°C. (see chart). This will provide the user with improved reliability and a wide margin of performance under stringent operating conditions. This is a result of a proprietary thick film process allowing for maximum heat transfer from the film to the BeO substrate. Coaxial Terminations Cable & Coaxial Terminations Suggested Mounting Procedures: 1. Make sure that the devices are mounted on flat surfaces to optimize the heat transfer (0.001 in/in under the device). 2. Drill and tap the heatsink for the appropriate thread size to be used. 3. Coat heatsink with a minimum amount of high quality silicone grease (0.001 in/in maximum thickness). 4. Position device on mounting surface and secure using socket head screws, flat and split washers. Torque screws to the appropriate value. Make sure that the device is flat against the heatsink. .500 .380 .190 .250 .200 x .140 THRU. (2 PLACES) 1.000 Case Style A Power Components Inc. RFP-15-50SMA-A Power (Watts) VSWR (Max.) Freq. (GHz) 15 1.25:1 DC-3 Power (Watts) VSWR (Max.) Freq. (GHz) 50 100 1.25:1 1.25:1 DC-3 DC-3 .190 .500 RFP-15-50SMA-A .614 Part Number .562 .960 .250 .125 DIA. THRU. (4 PLACES) Case Style B RFP-100-50SMA-B RFP-50-50SMA-B RFP-100-50SMA-B .125 .625 .125 .250 .687 .090 Components Inc. 1.125 Power .875 1.375 Part Number Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369 4.6.3 Coaxial Terminations Cable & Coaxial Terminations 1.060 1.625 .515 Case Style C .215 DIA. THRU. (4 PLACES) Part Number 1.625 RFP-150-50SMA-C RFP-250-50N-C RFP-500-50N-C VSWR (Max.) Freq. (GHz) 150 250 500 1.20:1 1.30:1 1.25:1 DC-3 DC-3 DC-1.2 Power (Watts) VSWR (Max.) Freq. (GHz) 200 1.08:1 DC-1 Power (Watts) VSWR (Max.) Freq. (MHz) 800 1.15:1 DC-500 .875 .375 .180 .187 .375 1.000 2.000 1.250 Power Components Inc. RFP-150-50SMA-C Power (Watts) 1.000 3.000 RFP-200-50N-D Part Number 2.180 .125 DIA. THRU. (4 PLACES) .100 .410 Case Style D 1.000 .800 Power Components Inc. RFP-200-50N-D 3.655 .345 1.030 MAX. RFP-800-50N-E 1.595 1.970 Components Inc. 1.405 Power .280 .985 MOUNT ON SUFFICIENT HEAT SINK USING THERMAL COMPOUND .180 DIA. THRU. (6 PLACES) Case Style E Part Number RFP-800-50N-E 3.315 .515 PART NUMBERING ORDERING INFORMATION 4.6.4 RFP - XXX - XXX - XXX - X Power Dissipation Case Style Resistance Value Connector Type Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369