VS811 8-Channel SDI/ASI Multiplexer/Demultiplexer KEY FEATURES Single card solution for multichannel transport of 270Mbps signals with network path diversity. >> Multichannel digital data on a single fiber >> Optional second optical output for network path diversity (Mux) and optional second optical receiver for automatic switchover and network resiliance (Demux) >> Designed to transport 270 Mbps signals complying with SMPTE-259M, 305M, and DVB-ASI EN-50083-9 >> Removes timing and alignment jitter from the SDI signals at the Demux output >> Selectable Test Pattern Generator for each channel: Color Bars, PLL Pathological, Equalizer Pathological and Black Field >> Enable/Disable control for Mux input channels >> Automatic cable equalization up to 300m for Belden 8281 >> Auxillary RS422 channel >> Small Formfactor Pluggable (SFP) optics available in 1310, 1550 & any ITU CWDM or DWDM wavelengths >> NEBS Level 3 Compliant >> Compatible with the VS183 Comprehensive Network Management System that provides Remote Status, Alarms & Configurations via SNMP & Ethernet VS811 Digital video Standards: # of Inputs: # of Outputs: Connector: Impedance: Data Rate: Equalization: external alarms SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) 8 (VS811-EO) 8 (VS811-OE) BNC 75 Ohm 270 Mbps up to 300m w/Belden 8281 N/C relay contact outputs for Major and Minor Alarm signals. 2 SC/PC 3.125 Gbps SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single Mode Status network management Compatible with the VS183 Comprehensive Network Management System that features SNMP & Web Browser Interfaces that provide monitoring and/or configuration of the card’s status, alarms & controls. Alarms Loss of Video Laser Transmitter Failure (VS811-EO) Loss of Input (VS811-OE) Optical transmitter # of Outputs: Connector: Data Rate: Laser Type: Laser Wavelengths: Output Power Level: Fiber Type: optical receiver # of Inputs: Connector: Receiver Type: Input Wavelengths: Sensitivity: Max Input Power: Fiber Type: 1 SC/PC APD SFP 1260nm - 1620nm ≤-30dBm -8dBm Single Mode RS422 # of Channels: Connector: Data Rate: 1 3 pin polarized header up to 500 Kbps LED indicators VS811-EO VS811-OE Channel 1 Loss of Video Channel 1 Loss of Video Channel 2 Loss of Video Channel 2 Loss of Video Channel 3 Loss of Video Channel 3 Loss of Video Channel 4 Loss of Video Channel 4 Loss of Video Channel 5 Loss of Video Channel 5 Loss of Video Channel 6 Loss of Video Channel 6 Loss of Video Channel 7 Loss of Video Channel 7 Loss of Video Channel 8 Loss of Video Channel 8 Loss of Video SFP Primary Laser Failure Loss of Primary Input SFP Secondary Laser Failure Loss of Secondary Input DC Power DC Power Video Products Group, Inc. 1380 Flynn Road Camarillo, CA 93012 Tel: (805) 383-5500 Fax: (805) 383-5519 http://www.vpginc.com Channels Enabled/Disabled (VS811-EO) Selected Test Pattern Test Pattern Generator Enabled/Disabled Model & Serial Number Controls Test Pattern Generator Enable/Disable Input Channel Enable/Disable (VS811-EO) Laser Transmitter Enable/Disable (VS811-EO) Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series Chassis Voltage: +3.3V, +5V Power Consumption: 10W max Operating Temperature: 0˚ to 50˚C chassis ambient Storage Temperature: -40˚C to 85˚C ambient Relative Humidity: 5% to 85% Compliance: NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS811-EO-SFP VS811-OE-SFP SFP-TR3-1310-PIN-S SFP-TR3-1550-APD-S SFP-TR3-1470-APD-C SFP-TR3-1490-APD-C SFP-TR3-1510-APD-C SFP-TR3-1530-APD-C SFP-TR3-1550-APD-C SFP-TR3-1570-APD-C SFP-TR3-1590-APD-C SFP-TR3-1610-APD-C SFP-R3-APD Multiplexer Card w/dual SFP cages, no optics installed Demultiplexer Card w/dual SFP cages, no optics installed 1310nm SFP Laser Module 1550nm SFP Laser Module 1470nm CWDM SFP Laser Module 1490nm CWDM SFP Laser Module 1510nm CWDM SFP Laser Module 1530nm CWDM SFP Laser Module 1550nm CWDM SFP Laser Module 1570nm CWDM SFP Laser Module 1590nm CWDM SFP Laser Module 1610nm CWDM SFP Laser Module SFP APD Receiver Video Products Group, Inc. reserves the right to make changes without notice to equipment specification or design. The information provided in this document is for guidance purposes only and shall not form part of any contract. © 2006 Video Products Group, Inc. All rights reserved. VS811 RevB June 2006