Document 285-1 Chip ChipInductors Inductors--0604SMS 0604HQ Series (1610) The 0604HQ Series offers the highest Q factors and current handling capabilities of any inductor this small. tance values not available in Coilcraft’s 0603, 0402 or 0906 product families. Custom values may be available. These parts combine the exceptionally high Q of an air core inductor with the rugged construction of a ceramic body component. They also provide intermediate induc- Coilcraft Designer’s Kit C151 contains samples of all values shown. To order, contact Coilcraft or purchase it on-line at http://order.coilcraft.com. 2 2 Part number1 0604HQ-1N1_X_ 0604HQ-2N6_X_ 0604HQ-4N5_X_ 0604HQ-5N0_X_ 0604HQ-6N8_X_ 0604HQ-7N6_X_ 0604HQ-10N_X_ Inductance2 Percent Q 900 MHz 2 (nH) tolerance3 2min4 L typ Q typ 1.15 @ 500 MHz 10,5 25 1.2 40 2.6 @ 500 MHz 10,5 45 2.6 78 4.5 @ 500 MHz 10,5 50 4.5 103 5.0 @ 500 MHz 10,5 60 4.9 106 6.8 @ 500 MHz 10,5 60 6.9 101 7.6 @ 500 MHz 10.4 @ 500 MHz 10,5 10,5 60 60 1. When ordering, please specify tolerance and packaging codes: Inductance tolerance code: Table above shows stock tolerances in bold. J= ±5%, K= ±10% 0604HQ-10N_X_ Packaging code: C= 7앨 machine-ready reel EIA RS-481 clear plastic tape. (2000 per full reel) B= Less than full reel On tape, not machine ready. To have a leader and a trailer added ($25 charge), use code letter C instead. 7.4 109 10.6 103 1.7 GHz L typ Q typ 1.2 136 2.6 163 4.7 155 5.2 178 7.4 172 7.9 11.5 137 160 SRF min5 (MHz) 6000 6000 5800 5300 4700 2 4400 4100 DCR IDC max6 2max7 Color (Ohms) (A) code 0.021 3.0 Black 0.026 2.0 Brown 0.032 1.8 Red 0.032 1.6 Orange 0.035 1.8 Yellow 2 0.035 0.037 1.5 1.5 Green Blue 2. Inductance measured using Coilcraft SMD-A fixture in Agilent/HP4286 impedance analyzer. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at 500MHz using Agilent/HP4291A with Agilent/HP16193 test fixture and on Agilent/HP8753D with Coilcraft SMD-D test fixture. 5. SRF measured using Agilent/HP8753D network analyzer and Coilcraft SMD-D test fixture. 6. DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft CCF858 test fixture. 7. For 15° C rise. 8. Operating temperature range −40°C to +125°C. 9. Electrical specifications at 25°C. For environmental data see Product Specifications section. Specifications subject to change without notice. Document 285-1 Revised 9/3/02 Document 285-2 0604HQ Series (1610) TYPICAL Q vs FREQUENCY TYPICAL L vs FREQUENCY A max B max C max D ref 0.073 0.054 0.047 0.025 0.040 0.013 0.034 0.053 0.025 0.025 1,85 1,19 0,64 1,37 E 1,02 F 0,33 G 0,86 H I 1,35 0,63 J 0,63 Parts/reel: 7″ 2000 Tape width: 8 mm For packaging data see Tape and Reel Specifications section. Specifications subject to change without notice. Document 285-2 Revised 5/2/02