Single-Stud Terminals WF 6 WF 8 14 mm Available Options 21 mm WF 12 28 mm Part No. 1780860000 Part No. 1780850000 Version Beige Wemid WF 10 23 mm Part No. 1780870000 Part No. 1780880000 Dimensions 19.6/67/56 (0.77/2.64/2.20) 18 (0.71) M6 24.6/67/65 (0.97/2.64/2.56) 23 (0.91) M8 UL CSA VDE 1000 V / 115 A / #14...2 AWG 1000 V / 150 A / #14...2 AWG 800 V / – / – 1000 V / 150 A / #14...1/0 AWG 1000 V / 255 A / 10...250 MCM 1000 V / 200 A / #14...1/0 AWG 1000 V / 320 A / 10...250 MCM 800 V / – / – 800 V / – / – Nm (lb. in.) 3...6 (26.5...53.1) Type Part No. 2/101.8/58.5 (0.08/4.01/2.30) 6...12 (53.1...106.2) Type Part No. 2/109.8/67 (0.08/4.32/2.64) 10...20 (88.5...177) 14...31 (123...274) Type Part No. Type Part No. 2/156/76.5 (0.08/6.14/3.01) 2/156/76.5 (0.08/6.14/3.01) WTW WF 6 1781220000 WTW WF 6 2300 1781230000 WTW WF 50 1781240000 WTW WF 8 1780900000 WTW WF 8 2300 1780910000 WTW WF 50 1781240000 WTW WF 10/12 1780890000 WTW WF 10/12 1780890000 WTW WF 10/12 2300 1780920000 WTW WF 10/12 2300 1780920000 WTW WF 50 1781240000 WTW WF 50 1781240000 WQL 2 WF 6 WQL 3 WF 6 WQL 2 WF 8 WQL 3 WF 8 WQL 2 WF10 WQL 3 WF 10 1781010000 WQL 2 WF 12 1781020000 WQL 3 WF 12 Width / Length / Height mm (in.) with TS 35 x 7.5 Pitch with partition mm (in.) Stud size Technical Data Rated voltage / rated current / wire size Torque Partition (thickness mm) Width / Length / Height mm (in.) Beige Wemid Epoxy resin Beige Wemid 50 mm long (for insulated cable lugs) 35.6/67/74 (1.40/2.64/2.91) 34 (1.34) M10 35.6/67/72 (1.40/2.64/2.83) 34 (1.34) M12 1000 V / 255 A / 10...250 MCM 1000 V / 320 A / 10...250 MCM 800 V / – / – Jumpers 2 pole 3 pole 1780970000 1780980000 1780990000 1781000000 1781030000 1781040000 Cover (1m) Transparent PVC ADP WF 6/WF 8 1780930000 ADP WF 6/WF 8 1780930000 ADP WF 10/WF 12 1780940000 ADP WF 10/WF 12 1780940000 HA WF 1781050000 HA WF 1781050000 HA WF 1781050000 HA WF 1781050000 DEK 5/5 DEK 5/5 0473460001 0473560001 DEK 5/5 DEK 5/5 0473460001 0473560001 DEK 5/5 DEK 5/5 0473460001 DEK 5/5 0473560001 DEK 5/5 0473460001 0473560001 Holder for cover Beige Wemid Marking Tags Print Consecutive horizontal Consecutive vertical APPLICATION SPECIFIC TERMINAL BLOCKS Note: Part numbers shown are for a single card of pre-printed tags numbered 1-50. For additional information, see Accessories section. See Accessories section for mounting rails, end brackets, additional marking material and accessories. 147