5W4HCA-H30 Super Bright White LED Features high intensity LED lamp 5 mm round epoxy package UV resistant epoxy for outdoor use Package Dimensions ¦Õ5.80 [0.23] 5.40 [0.21] Applications indicators illumination ¦Õ5.00 [0.2] Parameter Symbol Max 8.60 [0.34] Absolute Maximum Ratings ( Ta = 25 °C ) Unit mW Peak Forward Current *) IFP 80 mA Continuous Forward IF 30 mA VR 5 V Current 0.50 [0.02] Reverse Voltage Operating Temperature Topr 0.50 [0.02] 25.4 [1.00] MIN 100 1.00 [0.04] MIN PD 1.00 [0.04] MAX Power Dissipation 1.00 [0.04] 0.60 [0.02] -30 to +80 °C 2.54 [0.10] Range CATHODE Storage Temperature Tstg Tstg -40 °C to +100 °C Range Unit: mm[inches] Lead Soldering Tolerance: ¡À 0.25mm0.01 ] Tsol 260 °C Temperature **) *) Duty cycle max. 1/10, Pulse Width max. 0.1 ms **) At the position of 4 mm from the bottom of the package within 5 seconds Electrical Optical Characteristics ( Ta = 25 °C @ If = 20 mA ) Part No. 5W4HCA-H30 Material InGaN Lens Water Clear Emitting Forward Luminous Voltage (V) Intensity (mcd) Color White Chromaticity Coordinate (x/y) Typ Max Min Max 3.2 3.6 25000 30000 Viewing Angle (2θ1/2) 0.32/0.30 20 Caution in ESD 1.Static electricity and surge damages the LEDs. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices and equipment and machinery must be properly grounded. 2.When inspecting own final products on which LEDs were mounted, It is easy to find static-damaged LEDs by light emission test at lower current (below 1 mA is recommended) . 3.Damaged LEDs will show some unusual characteristics such as leak current remarkably increases, starting forward voltage becomes lower, or the LEDs get unlighted at the low current.