SUPERBRIGHT LED LAMP VAOL-5LWY4 Feature § § § Package Dimension Low Power Consumption High Intensity I.C. compatible Applications § § § § Commercial Outdoor Sign Board Front Panel Indicator Dot-Matrix Module LED Bulb Description § § § These High Intensity LEDs are Based on InGaN/Sapphire Material Technology Emitted color:White Water Transparent Lens ＊Tolerance：± 0.01 0.25 Unit：± inch mm Absolute Maximum Ratings at Ta＝25℃ Symbol Parameter Max. Unit 120 mW PD Power Dissipation VR Reverse Voltage 5 V IAF Average Forward Current 30 mA IPF Peak Forward Current（Duty＝0.1，1kHz） 100 mA ― Derating Linear Form 25℃ 0.4 mA∕℃ Topr Operating Temperature Range –40 to ＋ 80 ℃ Tstg Storage Temperature Range –40 to ＋ 100 ℃ Lead Soldering Temperature [1.6mm（0.063inch）From Body] 260℃ For 5 Seconds. Electrical / Optical Characteristics and Curves at Ta＝25℃ Symbol Parameter Test Condition VF Forward Voltage IR Reverse Current △θ Half Intensity Angle IF＝ 20 mA 60 Deg. IV Luminous Intensity IF＝ 20 mA 5000 mcd. X Coordination IF＝ 20 mA 0.30 Y Coordination IF＝ 20 mA 0.30 IF＝ 20 mA VR＝ 5 Min. Typ. Max. Unit 3.5 4.0 V 50 μA V Electrical Characteristics at Ta＝25℃ Symbol Iv VF λD Parameter Luminous Intensity Forward Voltage Dominant Wavelength Condition IF＝20mA IF＝20mA IF＝20mA Unit mcd V nm Binning Grade Range Grade Range Grade Range BIN 20 3500~4900 P0 2.8~3.0 WA Bluish White BIN 21 4900~6900 P1 3.0~3.2 WB Pure White BIN 22 6900~9700 P2 3.2~3.4 WC White P3 3.4~3.6 WD Yellowish White P4 3.6~3.8 P5 3.8~4.0 Intensity: Tolerance of minimum and maximum = ± 15% Vf: Tolerance of minimum and maximum = ± 0.05v NOTE: 1. Static electricity and surge damages the LED. It is recommend to use a anti-static wrist band or anti-electrostatic glove when handing the LEDs. All devices, equipment and machinery must be properly grounded. 2. Specific binning requirements –please contact our home office Radiation Diagram IF=20 mA 50% Power Angle Angle =60° WHITE Typical Electro-optical Characteristic Curves (25°C Free Air Temperature Unless Otherwise Specified) SUPERBRIGHT LED LAMP VAOL-5LWY4 Feature § § § Package Dimension Low Power Consumption High Intensity I.C. compatible Applications § § § § Commercial Outdoor Sign Board Front Panel Indicator Dot-Matrix Module LED Bulb Description § § § These High Intensity LEDs are Based on InGaN/Sapphire Material Technology Emitted color:White Water Transparent Lens ＊Tolerance：± 0.01 0.25 Unit：± inch mm Absolute Maximum Ratings at Ta＝25℃ Symbol Parameter Max. Unit 120 mW PD Power Dissipation VR Reverse Voltage 5 V IAF Average Forward Current 30 mA IPF Peak Forward Current（Duty＝0.1，1kHz） 100 mA ― Derating Linear Form 25℃ 0.4 mA∕℃ Topr Operating Temperature Range –40 to ＋ 80 ℃ Tstg Storage Temperature Range –40 to ＋ 100 ℃ Lead Soldering Temperature [1.6mm（0.063inch）From Body] 260℃ For 5 Seconds. Electrical / Optical Characteristics and Curves at Ta＝25℃ Symbol Parameter Test Condition VF Forward Voltage IR Reverse Current △θ Half Intensity Angle IF＝ 20 mA 60 Deg. IV Luminous Intensity IF＝ 20 mA 5000 mcd. X Coordination IF＝ 20 mA 0.30 Y Coordination IF＝ 20 mA 0.30 IF＝ 20 mA VR＝ 5 Min. Typ. Max. Unit 3.5 4.0 V 50 μA V Electrical Characteristics at Ta＝25℃ Symbol Iv VF λD Parameter Luminous Intensity Forward Voltage Dominant Wavelength Condition IF＝20mA IF＝20mA IF＝20mA Unit mcd V nm Binning Grade Range Grade Range Grade Range BIN 20 3500~4900 P0 2.8~3.0 WA Bluish White BIN 21 4900~6900 P1 3.0~3.2 WB Pure White BIN 22 6900~9700 P2 3.2~3.4 WC White P3 3.4~3.6 WD Yellowish White P4 3.6~3.8 P5 3.8~4.0 Intensity: Tolerance of minimum and maximum = ± 15% Vf: Tolerance of minimum and maximum = ± 0.05v NOTE: 1. Static electricity and surge damages the LED. It is recommend to use a anti-static wrist band or anti-electrostatic glove when handing the LEDs. All devices, equipment and machinery must be properly grounded. 2. Specific binning requirements –please contact our home office Radiation Diagram IF=20 mA 50% Power Angle Angle =60° WHITE Typical Electro-optical Characteristic Curves (25°C Free Air Temperature Unless Otherwise Specified)