Agilent HDSP-H571, HDSP-H573 5 x 7 General Purpose Dot Matrix Displays 53.2 mm (2.09 Inch) Package Data Sheet Description This display comprises 7 rows by 5 columns of 5.0 mm diameter dots on a pitch of 7.62 mm. The device is available in common row cathode and common row anode configurations. The displays come in black face paint. Each dot has high efficiency red. Device Selection Guide HDSP-H571 HDSP-H573 Description Common Row Anode Common Row Cathode Part Numbering System HDSP - X X X X Device Configuration/Color[1] 1: Common Row Anode 3: Common Row Cathode Character Height/Device Configuration[1] 7: 2.0 to 2.99 inch Height, Common Row Cathode (for HDSP-Sxxx and Mxxx Series only) Package Configuration[1] 5: 5 x 7 Dot Matrix Package Type/Color[1] Refer to Respective Datasheet Note: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. Features • 5 x 7 Dot matrix – Dot diameter 5.0 mm – Dot pitch 7.62 mm • High Efficiency Red (HER) • Black face paint Package Dimensions 38.40 (1.512) 30.48 (1.200) 7.62 (0.300) COL 1 2 3 4 5 ROW 1 2 ∅5.00 (0.197) x 35 53.20 (2.094) 45.72 (1.800) 3 4 5 6 7.62 (0.300) 7 PIN 1 PART NO. YWW = DATE CODE X = INTENSITY BIN HDSP-H571 YWW C00 8.60 (0.339) X COO = COUNTRY OF ORIGIN 0.51 (0.020) DIA. 2.54 (0.100) 4.0 ± 0.50 (0.157 ± 0.020) 15.24 (0.600) NOTES: 1. DIMENSIONS IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCE IS ± 0.25 mm. 2 38.10 (1.500) 0.50 (0.020) Internal Circuit Diagram Common Row Anode COLUMN PIN ROW 1 9 2 14 3 8 4 5 12 3 5 1 6 7 7 2 1 2 13 3 3 4 11 4 5 10 6 PIN NO. FUNCTION 1 2 3 ROW 5 ANODE ROW 7 ANODE COLUMN 2 CATHODE 4 5 6 7 8 COLUMN 3 CATHODE ROW 4 ANODE COLUMN 5 CATHODE ROW 6 ANODE ROW 3 ANODE 9 10 ROW 1 ANODE COLUMN 4 CATHODE 11 12 13 14 COLUMN 3 CATHODE ROW 4 ANODE COLUMN 1 CATHODE ROW 2 ANODE Internal Circuit Diagram Common Row Cathode COLUMN PIN 1 9 2 14 3 8 5 12 4 2 3 3 4 11 4 5 10 6 PIN NO. ROW 4 1 13 5 1 6 7 7 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 FUNCTION ROW 5 CATHODE ROW 7 CATHODE COLUMN 2 ANODE COLUMN 3 ANODE ROW 4 CATHODE COLUMN 5 ANODE ROW 6 CATHODE ROW 3 CATHODE ROW 1 CATHODE COLUMN 4 ANODE COLUMN 3 ANODE ROW 4 CATHODE COLUMN 1 ANODE ROW 2 CATHODE Absolute Maximum Ratings at TA = 25˚C Parameter Power Dissipation per Dot Peak Forward Current per Dot Average Forward Current per Dot Reverse Voltage per Dot Operating Temperature Storage Temperature Wave Soldering Conditions (2 mm [0.079 in.] below Body) High Efficiency Red (HER) 60 80 25[1] 5 –40 to +85 –40 to +85 250 3 Symbol PD IPEAK IF AVG VR TO Ts Temperature Time Units mW mA mA V °C °C °C s Note: 1. Derate above 50°C at 0.36 mA/°C. Optical/Electrical Characteristics at TA = 25˚C Parameter Forward Voltage Reverse Voltage per Dot Intensity per Dot Symbol VF VR Iv Peak Wavelength Dominant Wavelength Spectral Line Half Wavelength Thermal Resistance LED Junction-to-Pin λP λD ∆λ RθJ-PIN Min. 5.0 2.20 Typ. 2.1 Max. 2.6 3.30 Units V V mcd 632 622 40 320 nm nm nm °C/W/Dot Notes: 1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 2. Typical specification for reference only. Do not exceed absolute maximum ratings. Intensity Bin Limits (IFP = 40 mA at 1/8 Duty Factor) Bin G H IV, Min. (mcd) 2.20 3.31 Tolerance of each minimum and maximum = ±15%. 5 IV, Max. (mcd) 3.30 4.97 Test Conditions IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty IF = 20 mA IF = 20 mA IF = 20 mA 25 20 15 10 5 0 0 20 40 60 80 100 120 TA – AMBIENT TEMPERATURE – °C 100 12 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 5 mA) RθJ-A = 770°C/W IF – FORWARD CURRENT (DC) PER DOT – mA IF AVG. – MAXIMUM AVERAGE CURRENT – mA 30 90 80 70 60 50 40 30 20 10 0 0.5 1.0 1.5 2.0 2.5 3.0 VF – FORWARD VOLTAGE – V Figure 1. Maximum allowable average current per dot vs. ambient temperature. Figure 2. Forward current (DC) vs. forward voltage. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. For information on soldering LEDs, please refer to Application Note 1027 and Application Note 1060. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. 6 Device Reliability For reliability information, please see the reliability data sheet 5 x 7 Bi-Color General Purpose Dot Matrix Displays. 10 8 6 4 2 0 0 5 10 15 20 25 30 IF – FORWARD CURRENT PER DOT – mA Figure 3. Relative luminous intensity vs. DC forward current. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2004 Agilent Technologies, Inc. July 9, 2004 5988-1980EN