D series TM TM high voltage reed relays 15kV, 50W Very high isolation voltages, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies. 15kV Isolation The Rhodium contacts have low contact resistance while the Tungsten contacts can switch higher voltages. Flying Lead, Solder and Faston* Style Spade Terminal Options Low Contact Resistance High Power Switching PCB or Panel Mount Printed Circuit Board (PCB) or Panel mount, via nylon studs, versions are available. Connection options include PCB, solder turret tag, flying lead and Faston* style Spade Terminals. Available as Form A (SPNO) or Form B (SPNC) contact configurations. Contact Units Conditions 10kV Form A 10kV Form B Rhodium Tungsten Rhodium Tungsten Contact Materials Isolation Across Contacts kV DC or AC peak 10 10 10 10 Max. Switching Power W 50 50 50 50 Max. Switching Voltage V DC or AC peak 1000 7000 1000 7000 Max. Switching Current A DC or AC peak 3 2 3 2 Max. Current Carry A DC or AC peak 4 3 4 3 Capacitance Across Contacts pF Coil/Screen Grounded <0.2 <0.2 <0.2 <0.2 109 109 109 Lifetime Operations Dry Switching 109 Lifetime Operations 50W Switching 106 106 106 106 Contact Resistance mOhms Maximum (Typical) 50 (15) 250 (100) 50 (15) 250 (100) Insulation Resistance Ohms Minimum (Typical) 1010 (1013) 1010 (1013) 1010 (1013) 1010 (1013) Coil at 20°C 5V 12V 24V 5V 12V 24V Must Operate V DC 3.7 9 20 3.7 9 20 Must Release V DC 0.5 1.25 4 0.5 1.25 4 Operate Time ms Diode Fitted 3.0 3.0 3.0 2.0 2.0 2.0 Release Time ms Diode Fitted 2.0 2.0 2.0 3.0 3.0 3.0 Resistance Ohms 28 150 780 38 240 925 Construction Isolation Contact to Coil kV DC or AC peak 17 17 Insulation Resistance Contact 1010 (1013) to All Other Terminals Ohms Minimum (Typical) 1010 (1013) Environmental Operating Temperature Range °C -20 to +70 -20 to +70 Standard Panel Spade Weight Version ISO 9001 C E R T I F I E D 15kV Form A Tungsten 15 50 10000 2 2 <0.2 109 108 250 (100) 1010 (1013) 5V 12V 24V 3.7 9 20 0.5 1.25 4 3.0 3.0 3.0 2.0 2.0 2.0 16 95 350 17 1010 (1013) -20 to +70 Flying Lead Form A gm 23 28 29 38 Form B gm 31 36 37 46 Competitive part number cross-reference available at: www.cynergy3.com D series high voltage reed relays 15kV, 50W Part Numbering System Reed Switch size: D D A T 7 24 15 F Contact Form - A: Form A B: Form B Mounting Style: Contact Material R: Rhodium T: Tungsten No suffix: Standard PCB mount Moulding Ref. Number F: Flying Lead Contact Terminals Coil Voltage 05: 5V 12: 12V 24: 24V P: Panel Mount via nylon studs, turret contact/coil terminals Isolation Between Contacts - 10: 10kV, 15: 15kV (dat only) S: Panel Mount via nylon studs, Faston* style spade terminals STANDARD (e.g. DAT71210) 15.8 (0.62") 60.0 (2.36") 18.5 (0.73") 4.0 (0.15") PANEL MOUNT (e.g. DAT71210P) 1 FORM A (NO) 3 1 3 1 5.1 (0.2") 10.2 (0.4") 2 4 25.4 (1.0") 50.8 (2.0") 4 6.3 (0.25") FORM B (NC) 1 3 4+ 60.0 (2.36”) 9.5 (0.37") 50.8 2 Mounting Studs (2.0") M4 Complete with Nuts, Nylon 66 Requires 2x holes minimum 4.1mm. 10.0 (0.39") FLYING LEAD (e.g. DAT71210F) ~300 (12.0”) 2 1 2 2 'S' Suffix denotes the 6.3 'Push On' blade connectors, M4 fixing bolts and Epoxy potting. (e.g. DAT71210S) 4 3 25.4 (1.0") 2 NOTE: COIL POLARITY IS IMPORTANT FOR FORM B VARIANT ONLY. SPADE TYPE 15.8 (0.62) CIRCUIT DIAGRAMS (ALL VARIANTS) Viewed from underside 48.00 (1.88”) 11.60(0.46”) 11.0 (0.43”) 18.5 (0.73”) 13.0 (0.5”) 1 50.8 (2.0") 2 30.0(1.18”) max 3 4.0+-1 9.00 +- 1 (0.16”) (0.35”) 50.80 (2.0”) 25.40 (1.0”) 10.16(0.4”) 5.08 (0.2”) 3 4 2 Pins 0.635 Square 4 NOTE: PINS WHICH ARE NOT NUMBERED HAVE NO ELECTRICAL CONNECTION. 2 Mounting Studs M4 complete with nuts, Nylon 66. Requires 2x holes minimum 4.1mm. ISO9001 Certified USA Sales & Tech Support(866) 258-5057 Email: [email protected] Cynergy3 Components 2320 Paseo de las Americas, Suite 104 San Diego, CA 92154 EUROPE - UK Telephone +44 (0) 1202 897969 Fax +44 (0) 1202 891918 Email:[email protected] Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE ASIA - Thailand Telephone +66 (0)2 665 2517 Fax +66 (0)2 665 2588 Cynergy 3 Components, Asia 18/8 Fico Place 12th Floor Soi Sukhumvit 21 (Asoke) Klongtoey Nua, Wattana Bangkok, Thailand 10110 © 2007 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Corp. *Other names and brands may be claimed as the property of others.