wireless solutions wireless solutions GM862-GPS Modem ® SiRF Powered 20-channel High Sens. GPS receiver Pin to Pin Backw. compatible Quad Band RoHS Compliant SIM On Board SIM Holder Embedded TCP/IP Stack The new GM862-GPS module is at the cutting edge of the Telit product line. It combines a Quad-Band GSM/GPRS modem, with a 20 channel high sensitivity SiRFstarIII™ Single Chip GPS receiver. Based on the Pin-to-Pin compatibility of the GM862-GPS module to all previous versions, the functionality of existing and new applications can be extended by the latest state of the art GPS technology. With its ruggedized design, extended temperature range, integrated SIM-Card reader and industrial connectors, the Telit GM862-GPS is the perfect platform for all telematics applications, Fleet Management-, Tracking- and Security-devices and more. Additional features like Jamming Detection, integrated TCP/IP protocol stack, Easy Scan functionality and the direct support of an embedded camera offer extended functionality to the application at no additional cost. As a part of Telit’s corporate policy of environmental protection, all new Telit products comply to the RoHS (Restriction of Hazardous Substances) directive of the European Union (EU Directive 2002/95/EG). Product Features GPRS Class 10 PYTHON* Script Interpreter ■ ■ Output Power Class 4 (2W) @ 850 / 900 MHz Class 1 (1W) @ 1800 / 1900 MHz ■ Control via AT commands according to GSM 07.05, 07.07 and proprietary Telit ■ Supply Voltage Range: 3,4 – 4,2 V DC (3,8 V DC recommended) ■ GSM Power Consumption (typical values) - power off: ‹ 26 uA - Idle (registered, power saving): ‹ 4 mA - Dedicated mode: 170 mA - GPRS cl.10 (max): 500 m Embedded FTP and SMTP Client Extended Temperature Range Extended RF Sensitivity Quad-band EGSM 850 / 900 / 1800 / 1900 MHz ■ Serial Port Multiplexer GSM 7.10 ■ SIM Access Profile ■ GPS Power Consumption: Stand-by current: 1 mA Operating current: 70 mA, including 20 mA for the antenna LNA ■ Sensitivity: -107 dBm (typ.) @ 850 / 900 MHz -106 dBm (typ.) @ 1800 / 1900 MHz ■ Dimensions: 43,9 x 43,9 x 6.9 mm ■ Weight: 20 gr. ■ Extended Temp. range: -30° / +80° C ■ RoHS compliant ■ TCP/IP stack access via AT commands Making machines talk. GM862-GPS Modem GPS Receiver ■ ■ Hot starts ‹ 2 seconds ■ 200,000+ effective correlators ■ Supports 20-Channel GPS ■ GPS NMEA 0183 output format GPRS Data ■ GPRS class 10 ■ Mobile station class B ■ Coding Scheme 1 to 4 ■ PBCCH support Fax ■ GSM Supplementary Interfaces Call Forwarding 50-pin board to board Molex connector ■ Call Barring 13 I/O ports max. ■ Call Waiting & Call Hold Analog Audio (balanced and unbalanced) ■ Advice of Charge ■ 1 A/D converter, Buzzer output ■ Calling Line Identification Presentation (CLIP) ■ Camera direct support mode on I/O ports ■ Calling Line Identification Restriction (CLIR) ■ ITU-T V.24 Serial Link through UART: at CMOS level Baud rate from 300 to 115.200 bps Autobauding from 2.400 to 57.600 bps ■ Unstructured supplementary Services Mobile Originated Data (USSD) ■ Closed User Group ■ ■ Additional Features 50 Ohm MMCX Antenna connector ■ SIM Phonebook ■ Fixed Dialling Number (FDN) ■ Real Time Clock Audio ■ Alarm Management ■ Telephony, Emergency Call ■ Battery Management ■ Half rate, Full rate, Enhanced Full rate and Adaptive Multi Rate voice codecs (HR, FR, EFR, AMR) ■ Network LED support ■ IRA character set ■ Jamming Detection & Report ■ Embedded TCP/IP stack, including TCP, IP, UDP, SMTP and FTP protocol ■ ■ On board SIM holder, 1.8V / 3V with real-time detection Superior Echo Cancellation & Noise Reduction ■ Handset & Hands-free operations ■ DTMF Approvals ■ Fully type approved acording to R&TTE ■ CE, GCF, FCC, PTCRB, IC Python* application resources ■ Python* script interpreter (allows driving the module »internally« implementing the application code directly in the Python* language) ■ Memory: 3 MB of NV Memory for the user scripts and 1.5 MB RAM for the Python* engine usage ■ Over-the-Air Application SW update ■ IIC Bus and SPI Bus controlled in Python* SMS ■ Point-to-Point mobile originated and mobile terminated SMS ■ Concatenated SMS supported ■ SMS Cell Broadcast ■ Text and PDU mode Telit’s EASY ® features Circuit Switched Data Transmission Telit Communications S.p.A. Via Stazione di Prosecco, 5/B I-34010 Sgonico (Trieste), Italy Tel +39 040 4192 200 Fax +39 040 4192 383 wireless E-Mail: [email protected] solutions www.telit.com wireless ■ Asynchronous Transparent Circuit Switched Data (CSD) up to 14,4 kbps ■ Asynchronous Non-transparent CSD up to 9,6 kbps ■ V.110 ■ »EASY CAMERA« it provides the capability of a direct support of a VGA colour camera ■ »EASY SCAN« automatic scan over GSM frequencies (also without SIM card) Order-No. GM862-GPS 3 990 250 657 Copyright © 2006, Telit Communications S.p.A. · Subject to changes in technology, design and availability * Copyright © 1991–1995 by Stichting Mathematisch Centrum, Amsterdam, The Netherlands; All Rights Reserved. Copyright © 1995–2001 Corporation for National Research Initiatives; All Rights Reserved. Copyright © 2001–2006 Python Software Foundation; All Rights Reserved. All Rights Reserved are retained in Python. Revision 02 [10.2006] wireless solutions Group 3, Class 1 ■ ■ is in it. Extremely fast TTFF’s at low signal levels ■ ■ original size High sensitivity for indoor reception, up to -159 dBm