DEVICE NUMBER : ECN : DIR-033-007 REV : 1.2 PAGE : 1/8 5mm Infrared LED MODEL NO : IR333C-A Features : High radiant intensity Peak wavelength p=940nm View angle 20 High reliability 2.54mm Lead spacing Description : Infrared Emitting Diode (IR333C-A) is a high intensity diode, molded in a water clear plastic package. The device is spectrally matched with phototransistor, photodiode and infrared receiver module. Applications : Free air transmission system Optoelectronic switch Floppy disk drive Infrared applied system Smoke detector CHIP PART NO. IR MATERIAL GaAlAs LENS COLOR Water clear DEVICE NUMBER : ECN : DIR-033-007 REV : 1.2 PAGE : 2/8 5mm Infrared LED MODEL NO : IR333C-A Package Dimensions : Notes : 1.All dimensions are in millimeter. 2.Protruded resin under flange 1.5 mm Max. 3.Lead spacing is measured where the lead emerge from the package. 4.Lens colorWater clear. 5.Above specification may be changed without notice. We will reserve authority on material change for above specification. 6.These specification sheets include materials protected under copyright of corporation . Please don’t reproduce or cause anyone to reproduce them without consent. 7.When using this product , please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. We assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. DEVICE NUMBER : ECN : DIR-033-007 REV : 1.2 PAGE : 3/8 5mm Infrared LED MODEL NO : IR333C-A Absolute Maximum Ratings at TA = 25 Parameter Symbol Rating Unit Continuous Forward Current IF 50 mA Peak Forward Current Pulse width=100s, Duty cycle=1 Reverse Voltage IFP 1.0 A VR 5 V Operating Temperature Topr -40 ~ +85 Storage Temperature Soldering Temperature Tstg Tsol -40 ~ +85 260 Pd 100 Power Dissipation at(or below) 25Free Air Temperature Electronic Optical Characteristics : Parameter Symbol Min. Typ. Max. Radiant Intensity Ee Peak Wavelength Spectral Bandwidth P Forward Voltage Reverse Current View Angle VF IR 2 1/2 7.8 ---------------------------- 20 85 750 940 45 ------------- 1.2 1.4 2.6 ---20 1.5 1.85 4.0 10 ---- ---- Unit mW/sr nm nm V A deg Notice 4mm from mold body less than 5 seconds Condition IF=20mA IF=100mA,tp=100s, tP/T=0.01 IF=1A,tp=100s, tP/T=0.01 IF=20mA IF=20mA IF=20mA IF=100mA,tp=100s, tP/T=0.01 IF=1A,tp=100s, tP/T=0.01 VR=5V IF=20mA DEVICE NUMBER : ECN : DIR-033-007 REV : 1.2 PAGE : 4/8 5mm Infrared LED MODEL NO : IR333C-A Typical Electrical/Optical/Characteristics Curves DEVICE NUMBER : ECN : DIR-033-007 REV : 1.2 PAGE : 5/8 5mm Infrared LED MODEL NO : IR333C-A Typical Electrical/Optical/Characteristics Curves DEVICE NUMBER : ECN : DIR-033-007 REV : 1.2 PAGE : 6/8 5mm Infrared LED MODEL NO : IR333C-A Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level:90% LTPD:10% NO. Item Test Conditions Test Sample Failure Ac/Re Hours/ Size Judgement Cycles Criteria 1 Solder Heat TEMP : 260 ± 5 H : +85 2 5 secs 22 pcs 30 mins Temperature Cycle 50 cycles 22 pcs 0/1 IR 2 0.8 VF 1.2 0/1 5 mins 3 L : -55 30 mins H : +100 5 mins Thermal Shock 50 cycles 22 pcs 10 secs L : -10 U :Upper specification limit L :Lower specification limit 0/1 5 mins 4 High Temperature TEMP. : +100 Storage 1000 hrs 22 pcs 0/1 5 Low Temperature TEMP. : -55 Storage 1000 hrs 22 pcs 0/1 6 DC Operating Life IF=20mA 1000 hrs 22 pcs 0/1 7 High Temperature / 85 / 85% R.H. High Humidity 1000 hrs 22 pcs 0/1 DEVICE NUMBER : ECN : DIR-033-007 REV : PAGE : 5mm Infrared LED MODEL NO : IR333C-A Test Method For Power : Condition : Test Item : Unit : mW/sr To Distinguish Intensity: Condition:IF=20mA Bin Number M N P Q Min 7.80 11.00 15.00 21.00 Max 12.50 17.60 24.00 34.00 1.2 7/8 DEVICE NUMBER : ECN : DIR-033-007 5mm Infrared LED MODEL NO : IR333C-A Packing Specifications REV : 1.2 PAGE : 8/8