SUBMINIATURE DIP RELAY JRC-27F Features * 2 Form C contact * High switching capacity 60W, 125VA * Matching 16 pin IC socket File No.:E133481 * Epoxy sealed for automatic-wave * Soldering and cleaning File No.:CQC02001001938 COIL CONTACT DATA Contact Arrangement 2C AgNi, (Au Clad) Contact Material Contact Rating (Res. Load) 2A 30VDC 125VA/60W 2A Max. switching current Min. Applicable load 10mV 10µA Mechanical life 20 Allow Voltage VDC 3 2.25 0.3 30 4.5 1x10 OPS (at2A 30VDC) 005-M 5 3.75 0.5 90 8.0 3x10 5 OPS (at1A 30VDC) 006-M 6 4.50 0.6 130 10.0 009-M 9 6.80 0.9 280 14.5 012-M 12 9.00 1.2 450 18.5 015-M 15 11.3 1.5 625 22.0 024-M 24 18.0 2.4 1600 35.5 048-M 48 36.0 4.8 4000 56.0 1000M 500VDC 1500VAC 1min. 1000VAC 1min. Max. 6ms Release time (at nomi. Volt.) Max. 4ms -40 to +85 40% to 85%R.H. Sensitive (200mW) 20 Pick-up Drop-out Coil Coil Order Voltage Voltage Voltage Resistance Number 10% VDC VDC VDC Allow Voltage VDC DA: 1.5mm 10 to 55Hz 003-S 3 2.25 0.3 45 6 Functional 196m/s2(20g) 005-S 5 3.75 0.5 125 10 Destructive 980m/s2(100g) 006-S 6 4.50 0.6 180 12 009-S 9 6.80 0.9 405 18 012-S 12 9.00 1.2 720 24 015-S 15 11.3 1.5 1125 30 024-S 24 18.0 2.4 2880 48 Vibration Resistance Termination DIP & PCB Unit weight Approx. 5g Construction Standard (360mW) Coil Pick-up Drop-out Coil Order Voltage Voltage Voltage Resistance Number VDC 10% VDC VDC 003-M Operate time (at nomi. Volt.) Shock Resistance COIL DATA 5 CHARACTERISTICS Humidity See coil data table 1x108 OPS Electrical life Ambient temperature Max. 65 Coil Voltage 120VDC/240VAC Max. switching voltage Dielectric Between coil and Contacts Strength Between open contacts Temperature Rise 1A 125VAC Max. switching power Initial Insulation Resistance Sensitive: 200mW Standard: 360mW HighSensitive: 150mW Sealed IP67 HONGFA RELAY ISO9001*ISO/TS16949 *ISO14001 CERTIFIED VERSION: EN02-20040601 35 Telecom Relays JRC-27F 50m Initial Contact Resistance Max. Coil power COIL DATA SAFETY APPROVAL RATINGS High Sensitive (150mW) 20 2A 30VDC UL Allow Pick-up Drop-out Coil Coil Voltage Order Voltage Voltage Voltage Resistance VDC VDC VDC Number VDC (Max.) 10% (Max.) (Min.) 003-H 3 2.4 0.3 60 7.0 005-H 5 4.0 0.5 167 11.5 006-H 6 4.8 0.6 240 13.8 009-H 9 7.2 0.9 540 20.8 012-H 12 9.6 1.2 960 27.7 015-H 15 12.0 1.5 1500 34.6 125VAC 1A Note: When user's requirements cant't be found in the above table,special order allowed. ORDERING INFORMATION 012 S Type Coil voltage S: Sensitive (200mW) M: Standard (360mW) H: high-Sensitive (150mW) OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT Outline Dimensions 10max 11.5max 20.2max 3 1.2 PCB Layout Wiring Diagram 2.54 8-Ø0.9 2.54 JRC-27F Coil Power 3, 5, 6, 9, 12, 15, 24, 48VDC(Standard only) 7.62 Telecom Relays JRC-27F / 1 4 6 8 16 13 11 9 (Bottom View) 7.62 36 5.08 5.08 CHARACTERISTICS CURVE MAXIMUM SWITCHING POWER LIFE CURVE 1000V 100 AC Resistive Load Operations (X10000 OPS) Contact Voltage 30VDC Resistive Load 100V DC Resistive Load 10V 30 10 125VAC Resistive Load 1 10mV 10uA 100mA 1A Contact Current 10A 0 1 2 3 Contact Current (A) Telecom Relays JRC-27F 37