ETC OM1321NMM

OM1321SMM OM1321NMM
OM1321NKM OM1321NTM
OM1321STM
OM1321N2M
1.5 AMP POSITIVE ADJUSTABLE VOLTAGE
REGULATOR APPROVED TO DESC DRAWING 7703402
Three Terminal, Precision Adjustable
Positive Voltage Regulator In Hermetic
Style Packages (LM117HV)
Please see mechanical
outlines herein
FEATURES
•
•
•
•
•
Similar To Industry Standard LM117HV
Approved To DESC Standardized Military Drawing Number 7703402
Built In Thermal Overload Protection
Short Circuit Current Limiting
Available In Six Package Styles
DESCRIPTION
These three terminal positive regulators are supplied in hermetically sealed
packages. All protective features are designed into the circuit, including thermal
shutdown, current-limiting, and safe-area control. With heat sinking, these devices
can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5
amps. The unit also features output voltages that can be fixed from 1.2 volts to 57
volts using external resistors.
ABSOLUTE MAXIMUM RATINGS Tc @ 25°C
Power Dissipation
Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W
Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W
Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V
Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C
Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C
Thermal Resistance, Junction to Case:
Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17°C/W
Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W
Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W
Case Y, TO-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.0°C/W
Maximum Output Current:
Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A
Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 A
Recommended Operating Conditions:
Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2 to 37 VDC
Ambient Operating Temperature Range (TA). . . . . . . . . . . . . . . . - 55°C to + 125°C
Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.25 to 41.25 VDC
4 11 R2
Supersedes 1 07 R1
3.5 - 5
3.5
OM1321NTM, OM1321STM, OM1321NKM, OM1321SMM, OM1321NMM, OM1321N2M
ELECTRICAL CHARACTERISTICS
-55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified)
OM1321NTM, OM1321STM, OM1321NKM, OM1321SMM, OM1321NMM
Parameter
Symbol
Test Conditions
Min.
Max.
Reference Voltage
VREF
VDIFF = 3.0V, TA = 25°C
1.20
1.30
1.20
1.30
1.20
1.30
1.20
1.30
VDIFF = 3.3V
VDIFF = 40V
VDIFF = 60V
Line Regulation
RLINE
3.0V ≤ VDIFF ≤ 40V, Vout = Vref, TA = 25°C
3.3V ≤ VDIFF ≤ 40V, Vout = Vref
(Note 1)
•
•
•
•
40V ≤ VDIFF ≤ 60V, Vout = Vref, TA = 25°C
40V ≤ VDIFF ≤ 60V, Vout = Vref
Load Regulation
RLOAD
VDIFF = 3.3V, 10mA ≤ IL ≤ 1.5A
(Note 1)
•
VDIFF = 3.0V, 10mA ≤ IL ≤ 1.5A, TA = 25°C
•
VDIFF = 40V, 10mA ≤ IL ≤ 300mA, TA = 25°C
VDIFF = 40V, 10mA ≤ IL ≤ 195mA
VDIFF = 60V, 10mA ≤ IL ≤ 30mA
Thermal Regulation
•
•
Vin = 14.6V, IL = 1.5A
VRTH
-9
9
-23
23
-5
5
-10
10
-15
15
-15
15
-15
15
-15
15
-15
15
-16
16
Unit
V
mV
mV
mV
Pd = 20 Watts, t = 20 ms, TA = 25°C
Ripple Rejection
RN
f = 120 Hz, Vout = Vref
•
Adjustment Pin Current
VDIFF = 3.0V, TA = 25°C
IAdj
VDIFF = 3.3V
VDIFF = 40V
VDIFF = 60V
Adjustment Pin
∆IAdj
dB
100
•
•
•
VDIFF = 3.0V, 10mA ≤ IL ≤ 1.5A, TA = 25°C
VDIFF = 3.3V, 10mA ≤ IL ≤ 1.5A
Current Change
VDIFF = 40V, 10mA ≤ IL ≤ 195mA
•
•
3.0V ≤ VDIFF ≤ 40V, TA = 25°C
3.3V ≤ VDIFF ≤ 40V
3.3V ≤ VDIFF ≤ 60V
Miminum Load Current
ILmin
100
•
•
100
VDIFF = 40V, Vout = 1.4V (forced)
VDIFF = 60V, Vout = 1.4V (forced)
VDIFF = 5V
ICL
(Note 2)
5
-5
5
-5
5
-5
5
-5
5
-5
5
-5
VDIFF = 3.0V, Vout = 1.4V (forced)
VDIFF = 3.3V, Vout = 1.4V (forced)
µA
100
-5
VDIFF = 40V, 10mA ≤ IL ≤ 300mA, TA = 25°C
Current Limit
66
CAdj = 10 µF, Iout = 100 mA
(Note 2)
µA
5
5.0
•
•
•
•
5.0
mA
5.0
7.0
1.5
3.5
VDIFF = 40V, TA = 25°C
0.3
1.5
VDIFF = 60V, TA = 25°C
0.05
0.50
A
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. If not tested, shall be guaranteed to the specified limits.
3. The • denotes the specifications which apply over the full operating temperature range.
3.5
PART NUMBER DESIGNATOR
Standard Military Drawing Number
Omnirel Part Number
7703402M
7703402U
7703402T
7703402Y
7703402N
77034022
OM1321SMM
OM1321STM
OM1321NTM
OM1321 NKM
OM1321NMM
OM1321N2M
3.5 - 6
Omnirel Package Designation
SMD-3
TO-257 (Isolated)
TO-257 (non-Isolated)
TO-3
SMD-1
LCC-20
OM1321NTM, OM1321STM, OM1321NKM, OM1321SMM, OM1321NMM, OM1321N2M
ELECTRICAL CHARACTERISTICS
-55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified)
OM1321N2M
Parameter
Symbol
Test Conditions
Min.
Max.
Reference Voltage
VREF
VDIFF = 3.0V, TA = 25°C
1.20
1.30
1.20
1.30
1.20
1.30
1.20
1.30
VDIFF = 3.3V
VDIFF = 40V
VDIFF = 60V
Line Regulation
RLINE
3.0V ≤ VDIFF ≤ 40V, Vout = Vref, TA = 25°C
3.3V ≤ VDIFF ≤ 40V, Vout = Vref
(Note 1)
•
•
•
•
-9
9
-23
23
-5
5
40V ≤ VDIFF ≤ 60V, Vout = Vref, TA = 25°C
40V ≤ VDIFF ≤ 60V, Vout = Vref
Load Regulation
RLOAD
VDIFF = 3.3V, 10mA ≤ IL ≤ 500 mA
(Note 1)
•
VDIFF = 3.0V, 10mA ≤ IL ≤ 500 mA, TA = 25°C
•
VDIFF = 40V, 10mA ≤ IL ≤ 150 mA, TA = 25°C
VDIFF = 40V, 10mA ≤ IL ≤ 100 mA
VDIFF = 60V, 10mA ≤ IL ≤ 20 mA
Thermal Regulation
VRTH
•
•
Vin = 14.6V, IL = 300 mA
-10
10
-15
15
-15
15
-15
15
-15
15
-15
15
-3.1
3.1
Unit
V
mV
mV
mV
Pd = 4.0 Watts, t = 20 ms, TA = 25°C
Ripple Rejection
RN
f = 120 Hz, Vout = Vref
Adjustment Pin Current
66
VDIFF = 3.0V, TA = 25°C
IAdj
VDIFF = 3.3V
VDIFF = 40V
VDIFF = 60V
Adjustment Pin
•
∆IAdj
100
•
•
•
100
100
-5
•
VDIFF = 40V, 10mA ≤ IL ≤ 150 mA, TA = 25°C
VDIFF = 40V, 10mA ≤ IL ≤ 100 mA
•
3.0V ≤ VDIFF ≤ 40V, TA = 25°C
3.3V ≤ VDIFF ≤ 40V
3.3V ≤ VDIFF ≤ 60V
ILmin
VDIFF = 40V, Vout = 1.4V (forced)
VDIFF = 60V, Vout = 1.4V (forced)
Current Limit
VDIFF = 5V
ICL
(Note 2)
•
•
5
-5
5
-5
5
-5
5
-5
5
-5
5
-5
VDIFF = 3.0V, Vout = 1.4V (forced)
VDIFF = 3.3V, Vout = 1.4V (forced)
µA
100
VDIFF = 3.0V, 10mA ≤ IL ≤ 500 mA, TA = 25°C
VDIFF = 3.3V, 10mA ≤ IL ≤ 500 mA
Current Change
Miminum Load Current
dB
CAdj = 10 µF, Iout = 100 mA
(Note 2)
µA
5
5.0
•
•
•
•
5.0
mA
5.0
7.0
0.5
1.65
VDIFF = 40V, TA = 25°C
0.15
0.65
VDIFF = 60V, TA = 25°C
0.02
0.28
A
Notes: Please see previous page.
STANDARD APPLICATION
* Cin is required if regulator is located an
appreciable distance from power supply filter.
** Co is not needed for stability, however it does
improve transient response.
R
Vout = 1.25 V (1 + 2 )+ IAd j R2
R1
Since IAdj is controlled to less than 100 µA,
the error associated with this term is negligible
in most applications.
3.5 - 7
Vout
Vin
OM1321STM
3.5
R1
240Ω
IAdj
Adjust
Co**
1.0 µF
Cin*
0.1 µF
R2
OM1321NTM, OM1321STM, OM1321NKM, OM1321SMM, OM1321NMM, OM1321N2M
MECHANICAL OUTLINE
.425M
.200M
.190M
1
M
.045M
.035M
.100M
.200M
3
M
.420M
.410M
.425M
.035 WIDEM
FLAT 3 PLCS.M
2
.665M
.645M
.150M
.140M
.537M
.527M
M
M
.350 MIN.M
.430M
.410M
1 2 3
± .020M
.115M
.160M
.020M
.080 M
.038 MAX.M
OM1321SMM
.750M
.500M
.120 TYP.M
.100 TYP.M
.035M
.025M
Front View
Pin 1 - Adjust
Pin 2 - Input
Pin 3 - Output
Tab - Isolated
M .005M
.140
.015
OM1321NTM
Non-Isolated
Front View
Pin 1 - Adjust
Pin 2 - Output
Pin 3 - Input
Tab - Isolated
Front View
Pin 1 - Adjust
Pin 2 - Output
Pin 3 - Input
Tab - Output
.140
1
2
.075
.157
OM1321STM
Isolated
.140
.075
.415
3
.062
.375
.030
MIN.
OM1321NMM
Pin 1 - Adjust
Pin 2 - Input
Pin 3 - Output
1.197
1.53
REF.
1.177
0.875
MAX.
0.675
0.655
0.188 R.
MAX.
0.135
MAX.
0.450
0.250
0.043
0.038
(±.003)
2
1
0.161
0.151
Pin 1 - Adjust
Pin 2 - Input
Case - Output
.075 (±.010)
TYP.
4
.010
3
9
.160
SQ. REF.
1
13
19
.025 SQ.
TYP.
.003
0.225
0.205
.040
.085
0.525 R.
MAX.
18
14
.050
TYP.
.050 (±.005)
TYP.
2 PLCS.
OM1321NKM
3.5
.020 X45°
REF.
0.440
0.420
.025
TYP.
0.312
MIN.
SEATING
PLANE
.009 R.
20 PLCS.
.065
.040 X45°
REF (3 PL)
OM1321N2M
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
Pin 11
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16
Pin 17
Pin 18
Pin 19
Pin 20
VIN
VOUT
VOUT
VOUT(Sense)
NC
NC
NC
Adjust
NC
VIN
For additional information please see the mechanical outline section.