SO5511 / SO5511(B) Semiconductor LED Lamp Features • Orange colored diffusion lens type • φ5mm(T-13/4)all plastic mold type • Low power consumption Outline Dimensions unit : STRAIGHT TYPE mm STOPPER TYPE 5.0±0.2 5.0±0.2 8.6±0.2 0.8±0.2 0.8±0.2 8.6±0.2 4.0±0.5 0.5 25.0 MIN 25.0 MIN 1.0 MIN 2.54 NOM 1.0 MIN 2.54 NOM 5.8±0.2 5.8±0 PIN Connections 1.Anode 2.Cathode KLO-0003-000 1 SO5511 / SO5511(B) Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 85 mW Forward Current IF 30 mA IFP 50 mA Reverse Voltage VR 4 V Operating Temperature Topr -25∼85 ℃ Storage Temperature Tstg -30∼100 ℃ 1 * Peak Forward Current 2 260℃ for 5 seconds * Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2. Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical Characteristics Characteristic Symbol Test Condition Forward Voltage VF IF= 20mA - 2.0 2.7 V Luminous Intensity IV IF= 20mA - 40 - mcd IF= 20mA - 615 - nm IF= 20mA - 35 - nm Reverse Current λP Δλ IR VR=4V - - 10 uA Half angle θ1/2 IF= 20mA - ±20 - deg Peak Wavelength Spectrum Bandwidth KLO-0003-000 Min. Typ. Max. Unit 2 SO5511 / SO5511(B) Characteristic Diagrams Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 1 IF - VF Forward Voltage VF [V] Forward Current IF [mA] Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF – Ta Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KLO-0003-000 3