SBR60A60PT Using state-of-the-art SBR IC process technology, the following features are made possible in a single device: Major ratings and characteristics Values Characteristics IF(AV) Rectangular Waveform VRRM VF@30A, Tj=125OC Tj (operating/storage) Device optimized for low forward voltage drop to maximize efficiency in Power Supply applications Units 60 A 60 V 0.58 -65 to 150 V, typ O C MECHANICAL: * Molded Plastic TO-3P package ELECTRICAL: * Low Forward Voltage Drop * Reliable High Temperature Operation * Super Barrier Design * Softest, fast switching capability * 150OC Operating Junction Temperature 2 1 Anode Common Cathode 3 Anode Maximum Ratings and Electrical Characteristics (at 25OC unless otherwise specified) DC Blocking Voltage Working Peak Reverse Voltage Peak Repetitive Reverse Voltage SYMBOL VRM VRWM VRRM UNITS 60 Volts IO 60 Amps Peak Forward Surge Current - 1/2 60hz IFSM 350 Amps Peak Repetitive Reverse Surge Current (2uS-1Khz) IRRM 3 Amps Instantaneous Forward Voltage (per leg) IF = 30A; TJ = 25OC IF = 30A; TJ= 125OC VF * Typ ----- Max 0.73 0.63 IR Typ ----- Max 0.5 100 Average Rectified Forward Current (Rated VR-20Khz Square Wave) - 50% duty cycle Maximum Instantaneous Reverse Current at Rated VRM TJ = 25OC TJ = 125OC Maximum Rate of Voltage Change (at Rated VR) dv/dt 10,000 Maximum Thermal Resistance JC (per leg) RθJC 2 TJ -65 to +150 Operating and Storage Junction Temperature Volts mA mA V/uS O C/W O C * Pulse width < 300 uS, Duty cycle < 2% ________________________________________________________________________________________________ www.apdsemi.com Version 1.0 - August 2006 1 SBR60A60PT 100 Ir, Reverse Current (mA) Tj=125C Tj=100C 10 Tj=75C 1 Tj=25C If, Instantaneous Forward Current (Amps) 100 0.1 10 Tj=125C Tj=100C Tj=75C Tj=25C 1 0 10 20 30 40 50 0.1 60 0.2 0.3 0.4 0.5 0.6 Vf, Instantaneous Forward Voltage (Volts) Vr, Reverse Voltage (Volts) Figure 1: Typical Reverse Current (per leg) Figure 2: Typical Forward Voltage (per leg) If, Average Forward Current (Amps) 30 20 10 0 0 25 50 75 100 125 150 Tc, Case Temp (C) Figure 3: Current Derating, Case (per leg) APD SEMICONDUCTOR reserves the right to make changes without further notice to any products herein. APD SEMICONDUCTOR makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APD SEMICONDUCTOR assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APD SEMICONDUCTOR data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APD SEMICONDUCTOR does not convey any license under its patent rights nor the rights of others. APD SEMICONDUCTOR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APD SEMICONDUCTOR product could create a situation where personal injury or death may occur. Should Buyer purchase or use APD SEMICONDUCTOR products for any such unintended or unauthorized application, Buyer shall indemnify and hold APD SEMICONDUCTOR and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APD SEMICONDUCTOR was negligent regarding the design or manufacture of the part.. 1 Lagoon Drive, Suite 410, Redwood City, CA 94065, USA Ph: 650 508 8896 FAX: 650 508 8865 Homepage: www.apdsemi.com email: [email protected] ________________________________________________________________________________________________ www.apdsemi.com Version 1.0 - August 2006 2