TS2GJF150 2GB USB2.0 JetFlash™150 Description Features TS2GJF150 is a 2GB USB Flash Drive with 1pcs of • Color: Silver 2Gx8 (or 2pcs of 1Gx8) Flash Memory assembled on • USB Interface: Compliant with USB specification 2.0. printed circuit board. • Security Function: Password protection provided • Boot-Up Function: Support USB-ZIP/USB-HDD boot-up Outline mode supported • PC-Lock Function: Makes JF150 the key to your computer • No external power or battery needed • LED indicates the usage status. Dimensions Transcend Information Inc. 1 Side Millimeters Inches A 59 ± 1.00 2.32 ± 0.04 B 10 ± 1.00 0.39 ± 0.04 C 19 ± 1.00 0.75 ± 0.04 TS2GJF150 2GB USB2.0 JetFlash™150 Block Diagram •With 1 pcs of 2Gx8 Flash Memory D0~D7 4 Pins Connector USB - D0~D7 /CE0, /CE1 USB + /CE USB Flash Disk Connector Other /WE Flash Memory 2Gx8 /RE •With 2 pcs of 1Gx8 Flash Memory D0~D7 4 Pins Connector USB /CE0, /CE1 USB + USB Flash Disk Connector D0~D7 /CE /WE Other Flash Memory 1Gx8 /RE D0~D7 /CE2, /CE3 /CE /WE /RE Transcend Information Inc. 2 Flash Memory 1Gx8 TS2GJF150 2GB USB2.0 JetFlash™150 Pinouts Pin Identification Pin No. Pin Name 01 VCC 02 USB- 03 USB+ 04 VSS Symbol Function USB- USB differential signal: USB+ The pairs are used to transmit Data/Address/Command VSS Ground VCC USB power input Specifications Storage Capacity 2GB Data Retention 10 years Erase Cycles >100,000 times Connector Durability 10,000 times System Performance Read: 12MB/sec (max.), Write: 8MB/sec (max.) Power Supply DC 5V±10% via the USB port Temperature Range Operation: 0-70 C, Non-Operating: -40 C-85 C Certificates CE, FCC, BSMI Transcend Information Inc. o o 3 o TS2GJF150 2GB USB2.0 JetFlash™150 Absolute Maximum Ratings Symbol VCC33 VIN VOUT VCC25 Parameter Power Supply Input Voltage Output Voltage Internal Power Supply Rating -0.3 to 4.0 -0.3 to Vcc+0.3 -0.3 to Vcc+0.3 -0.3 to 3.0 Unit V V V V DC Characteristics: TOPR=0℃~70℃；VCC33=3.0V~3.6V；VCC25=2.25V~2.75V Symbol Parameter IIL Input Leakage Current (No pull-up or pull-down) IOZ Tri-State Leakage Current VIL Input Low Voltage VIH Input High Voltage VOL Output Low Voltage (IOL=4mA) VOH Output High Voltage (IOH=4mA) Rt Input pull-up/down resistance (VIL=0V or VIH= VCC) IACT Active Current ISLP Sleep Current Min. -10 Typ. -10 Max. 10 Units μA 10 0.8 190 μA V V V V KΩ 73 120 mA μA Max. 3.6 Vcc+0.3 2.75 Units V V V 2.0 0.4 2.4 40 75 Recommended Operating Conditions Symbol Parameter VCC33 Power Supply Voltage VIN Input Voltage VCC25 Internal Power Supply Min. 3.0 0 2.25 Typ. 3.3 Vcc 2.5 Above technical information is based on industry standard data and tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes in specifications at any time without prior notice. Transcend Information Inc. 4