TS2GJFV90C 2GB USB2.0 JetFlash? V90C Description Features TS2GJFV90C is a 2GB USB Flash Drive with 2pcs of USB Interface: Compliant with USB specification 2.0. PC-Lock Function: Makes JetFlash? a key to lock your computer 1Gx8 Flash Memory assembled on printed circuit board. Secret-Zip Function: Compress and/or Password protect saved files using AES Encryption Outline E-Mail Function: Use your JetFlash? to Securely Send, Receive and Save e-mails AutoLogin Function: Automatically login to websites where you have a password Favorites Function: Store all your favorite website addresses on the JetFlash? DataBackup Function: Backup, Restore and Synchronize your Data using the JetFlash? No external power or battery needed Dimensions Transcend Information Inc. 1 Side Millimeters Inches A 33.8 0.15 1.33 0.006 B 4.5 0.15 0.18 0.006 C 13.1 0.15 0.52 0.006 TS2GJFV90C 2GB USB2.0 JetFlash? V90C Pinouts Pin Identification Pin No. Pin Name 01 VCC 02 USB- 03 USB+ 04 VSS Symbol Function USB- USB differential signal: USB+ The pairs are used to transmit Data/Address/Command VSS Ground VCC USB power input Specifications Storage Capacity 2GB Data Retention 10 years Erase Cycles >100,000 times Connector Durability 10,000 times System Performance Read: 9~10MB/sec (max.), Write: 2MB/sec (max.) Power Supply DC 5V¡10% via the USB port Temperature Range Operation: 0-70oC, Non-Operating: -40oC-85oC Certificates CE, FCC, BSMI Transcend Information Inc. 2 TS2GJFV90C 2GB USB2.0 JetFlash? V90C Absolute Maximum Ratings Symbol VCC VIN Parameter Power Supply Input Voltage Rating 4.5 to 5.5 3 to 3.6 Unit V V DC Characteristics: Symbol Parameter IIL Input Leakage Current (No pull-up or pull-down) IOZ Tri-State Leakage Current VIL Input Low Voltage VIH Input High Voltage VOL Output Low Voltage (IOL=4mA) VOH Output High Voltage (IOH=4mA) Rpu Input pull-up resistance ( PU=high, PD=low) Rpd Input pull-down resistance ( PU=low, PD=high) IACT Active Current ISLP Sleep Current Min. -10 Typ. Max. 10 Units £ A 10 0.8 2.4 55 75 110 £ A V V V V KΩ 40 75 150 KΩ 55 120 mA £ A Max. 5.5 3.6 1.98 Units V V V -10 2.0 0.4 Recommended Operating Conditions Symbol Parameter VCC Power Supply Voltage VIN Input Voltage VCC18 Internal Power Supply Min. 4.5 3 1.62 Typ. 5 3.3 1.8 Above technical information is based on industry standard data and tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes in specifications at any time without prior notice. Transcend Information Inc. 3