KINGBRIGHT AA4040MGC

4.0x4.0mm RIGHT ANGLE SURFACE MOUNT
LED LAMP
Part Number: AA4040MGC
Mega Green
Features
Description
z SINGLE COLOR.
The Mega Green source color devices are made with DH
z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER
InGaAlP on GaAs substrate Light Emitting Diode.
PROCESS.
z AVAILABLE ON TAPE AND REEL.
z IDEAL FOR BACKLIGHTING.
z PACKAGE : 500PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1238
REV NO: V.6
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1201000445
Selection Guide
Part No.
Dice
AA4040MGC
Iv (mcd) [2]
@ 20mA
Lens Type
Mega Green (InGaAlP)
Viewing
Angle [1]
Min.
Typ.
2θ1/2
50
100
90°
WATER CLEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Mega Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
574
nm
IF=20mA
Mega Green
568
nm
IF=20mA
Spectral Line Half-width
Mega Green
26
nm
IF=20mA
C
Capacitance
Mega Green
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Mega Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Mega Green
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Mega Green
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1238
REV NO: V.6
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1201000445
Mega Green
AA4040MGC
SPEC NO: DSAD1238
REV NO: V.6
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1201000445
AA4040MGC
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1238
REV NO: V.6
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1201000445
PACKING & LABEL SPECIFICATIONS
AA4040MGC
SPEC NO: DSAD1238
REV NO: V.6
DATE: MAY/08/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1201000445