KINGBRIGHT AAD1

XPower
PRELIMINARY SPEC
Part Number : AAD1-1010ZG9ZC
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z PLCC-4 PACKAGE.
z SINGLE COLOR.
z HIGH LUMINANCE.
z HIGH POWER,OPERATING CURRENT @350mA.
z SUITABLE FOR ALL SMT ASSEMBLY METHODS.
z PACKAGE : 300PCS / REEL.
Applications
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z traffic signaling.
z RoHS COMPLIANT.
z backlighting (illuminated advertising , general lighting).
z interior and exterior automotive lighting.
z substitution of micro incandescent lamps.
Application Note
z portable light source (e.g. bicycle flashlight).
Static electricity and surge damage the LEDS.
z signal and symbol luminaire for orientation.
It is recommended to use a wrist band or anti-electrostatic
z marker lights (e.g. steps, exit ways, etc).
glove when handling the LEDs.
z decorative and entertainment lighting.
All devices, equipment and machinery must be electrically
z indoor and outdoor commercial and residential
architectural lighting.
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2.Tolerance is ±0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH1975
REV NO: V.1
DATE: FEB/08/2007
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP:1201001891
Selection Guide
Dice
Part No.
AAD1-1010ZG9ZC
Lens Type
GREEN (AlInGaN)
WATER CLEAR
luminous Intensity [2]
Iv(cd)@ 350 mA
Viewing
Angle [1]
Φv (lm) [2]
@ 350 mA
Min.
Typ.
Min.
Typ.
2θ1/2
65
85
35
48
20°
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Parameter
Symbol
Value
Unit
Power dissipation
Pt
1.15
W
Reverse Voltage
VR
not designed for reverse operation
V
Junction temperature
TJ
110
°C
Operating Temperature
Top
-40 To +85
°C
Storage Temperature
Tstg
-40 To +85
°C
IF
350
mA
Peak Forward Current [2]
IFM
500
mA
Thermal resistance [1]
Rth
47
°C/W
DC Forward Current [1]
Notes:
1.Results from mounting on PC board FR4(pad size≥100mm2 per pad), mounted on pc board-metal core PCB is recommend
for lowest thermal Resistance.
2.1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA=25°C
Parameter
Symbol
Value
Unit
Wavelength at peak emission
[Typ.]
IF=350mA
λpeak
525
nm
λDom [1]
530
nm
Spectral bandwidth at 50%ΦREL MAX
IF=350mA
[Typ.]
Δλ
45
nm
Viewing angle at 50%ΦV
θ
20
°
Dominant Wavelength
IF=350mA [Typ.]
[Typ.]
Forward Voltage IF=350mA [Min.]
Forward Voltage IF=350mA [Typ.]
Forward Voltage
2.7
VF [2]
IF=350mA [Max.]
3.3
V
3.8
IR
not designed for reverse operation
μA
Temperature coefficient of λpeak
IF=350mA, -10°C≤ T≤100°C
[Typ.]
TCλpeak
0.16
nm/ °C
Temperature coefficient of λdom
IF=350mA, -10°C≤ T≤100°C
[Typ.]
TCλdom
0.14
nm/ °C
Temperature coefficient of VF
IF=350mA, -10°C≤ T≤100°C
[Typ.]
TCV
-2.0
mV/ °C
Reverse Current (VR=5V)
[Max.]
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
SPEC NO: DSAH1975
REV NO: V.1
DATE: FEB/08/2007
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP:1201001891
AAD1-1010ZG9ZC
SPEC NO: DSAH1975
REV NO: V.1
DATE: FEB/08/2007
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP:1201001891
AAD1-1010ZG9ZC
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAH1975
REV NO: V.1
DATE: FEB/08/2007
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP:1201001891
PACKING & LABEL SPECIFICATIONS
AAD1-1010ZG9ZC
SPEC NO: DSAH1975
REV NO: V.1
DATE: FEB/08/2007
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP:1201001891