SURFACE MOUNT DISPLAY PRELIMINARY SPEC Part Number: ACPSA04-41SEKWA SUPER BRIGHT ORANGE Features Description 0.4 INCH CHARACTER HEIGHT. The Super Bright Orange source color devices are made LOW CURRENT OPERATION. with DH InGaAlP on GaAs substrate Light Emitting Diode. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 400PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm SPEC NO: DSAG4989 REV NO: V.1 DATE: MAY/30/2006 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 1 OF 5 ERP: 1361000051 Selection Guide Part No. Dice ACPSA04-41SEKWA Iv (ucd) [1] @ 10mA Lens Type SUPER BRIGHT ORANGE (InGaAlP) WHITE DIFFUSED Min. Typ. 1900 7800 Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Orange λD [1] Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG4989 REV NO: V.1 DATE: MAY/30/2006 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 2 OF 5 ERP: 1361000051 Super Bright Orange ACPSA04-41SEKWA SPEC NO: DSAG4989 REV NO: V.1 DATE: MAY/30/2006 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 3 OF 5 ERP: 1361000051 ACPSA04-41SEKWA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG4989 REV NO: V.1 DATE: MAY/30/2006 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 4 OF 5 ERP: 1361000051 PACKING & LABEL SPECIFICATIONS ACPSA04-41SEKWA SPEC NO: DSAG4989 REV NO: V.1 DATE: MAY/30/2006 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 5 OF 5 ERP: 1361000051