SURFACE MOUNT DISPLAY Part Number: ACPSA04-41SYKWA SUPER BRIGHT YELLOW Features Description 0.4 INCH CHARACTER HEIGHT. The Super Bright Yellow source color devices are made LOW CURRENT OPERATION. with DH InGaAlP on GaAs substrate Light Emitting Diode. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 400PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm SPEC NO: DSAG4992 REV NO: V.1 DATE: MAY/30/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000055 Selection Guide Part No. Dice ACPSA04-41SYKWA Iv (ucd) [1] @ 10mA Lens Type SUPER BRIGHT YELLOW (InGaAIP) WHITE DIFFUSED Min. Typ. 8000 24700 Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength ∆λ1/2 Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 VF [2] Forward Voltage Super Bright Yellow 2.0 IR Reverse Current Super Bright Yellow Max. pF VF=0V;f=1MHz 2.5 V IF=20mA 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG4992 REV NO: V.1 DATE: MAY/30/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000055 Super Bright Yellow ACPSA04-41SYKWA SPEC NO: DSAG4992 REV NO: V.1 DATE: MAY/30/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000055 ACPSA04-41SYKWA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG4992 REV NO: V.1 DATE: MAY/30/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000055 PACKING & LABEL SPECIFICATIONS ACPSA04-41SYKWA SPEC NO: DSAG4992 REV NO: V.1 DATE: MAY/30/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000055