SURFACE MOUNT DISPLAY Part Number: ACPSC04-41SURKWA Features HYPER RED Description 0.4 INCH CHARACTER HEIGHT. The Hyper Red source color devices are made with DH LOW CURRENT OPERATION. InGaAlP on GaAs substrate Light Emitting Diode. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 400PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm SPEC NO: DSAG4999 REV NO: V.1 DATE: JUN/01/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1361000056 Selection Guide Part No. Dice ACPSC04-41SURKWA Iv (ucd) [1] @ 10mA Lens Type HYPER RED (InGaAlP) WHITE DIFFUSED Description Min. Typ. 4700 22800 Common Cathode, Rt. Hand Decimal. Note: 1. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 650 nm IF=20mA Hyper Red 635 nm IF=20mA Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG4999 REV NO: V.1 DATE: JUN/01/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1361000056 Hyper Red ACPSC04-41SURKWA SPEC NO: DSAG4999 REV NO: V.1 DATE: JUN/01/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1361000056 ACPSC04-41SURKWA Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG4999 REV NO: V.1 DATE: JUN/01/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1361000056 PACKING & LABEL SPECIFICATIONS ACPSC04-41SURKWA SPEC NO: DSAG4999 REV NO: V.1 DATE: JUN/01/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1361000056