SURFACE MOUNT DISPLAY Part Number: ACPSC04-41SYKWA SUPER BRIGHT YELLOW Features Description 0.4 INCH CHARACTER HEIGHT. The Super Bright Yellow source color devices are made LOW CURRENT OPERATION. with DH InGaAlP on GaAs substrate Light Emitting Diode. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 400PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm SPEC NO: DSAG5000 REV NO: V.1 DATE: JUN/01/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP: 1361000057 Selection Guide Part No. Dice Lens Type SUPER BRIGHT YELLOW (InGaAIP) ACPSC04-41SYKWA Iv (ucd) [1] @ 10mA WHITE DIFFUSED Description Min. Typ. 8000 24700 Common Cathode, Rt. Hand Decimal. Note: 1.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5000 REV NO: V.1 DATE: JUN/01/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP: 1361000057 Super Bright Yellow ACPSC04-41SYKWA SPEC NO: DSAG5000 REV NO: V.1 DATE: JUN/01/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP: 1361000057 ACPSC04-41SYKWA Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG5000 REV NO: V.1 DATE: JUN/01/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP: 1361000057 PACKING & LABEL SPECIFICATIONS ACPSC04-41SYKWA SPEC NO: DSAG5000 REV NO: V.1 DATE: JUN/01/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP: 1361000057