KINGBRIGHT AM2520PBC-A08

SUBMINIATURE SOLID STATE LAMP
Part Number: AM2520PBC/A08
PRELIMINARY SPEC
BLUE
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
zSUBMINIATURE PACKAGE.
The Blue source color devices are made with InGaN
zWIDE VIEWING ANGLE.
on SiC Light Emitting Diode.
zYOKE LEAD.
Static electricity and surge damage the LEDS.
zLONG LIFE - SOLID STATE RELIABILITY.
It is recommended to use a wrist band or anti-electrostatic
zLOW PACKAGE PROFILE.
glove when handling the LEDs.
zPACKAGE : 1000PCS / REEL.
All devices, equipment and machinery must be electrically
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
grounded.
zRoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAG5697
REV NO: V.1
DATE: JUN/17/2006
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1202001295
Selection Guide
Dice
Part No.
AM2520PBC/A08
Iv (mcd) [2]
@ 20mA
Lens Type
BLUE (InGaN)
Viewing
Angle [1]
Min.
Typ.
2θ1/2
110
250
20°
WATER CLEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity / luminous flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
468
nm
IF=20mA
Blue
470
nm
IF=20mA
Spectral Line Half-width
Blue
21
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.3
3.8
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
114
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG5697
REV NO: V.1
DATE: JUN/17/2006
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1202001295
Blue
AM2520PBC/A08
SPEC NO: DSAG5697
REV NO: V.1
DATE: JUN/17/2006
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1202001295
AM2520PBC/A08
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAG5697
REV NO: V.1
DATE: JUN/17/2006
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1202001295
PACKING & LABEL SPECIFICATIONS
AM2520PBC/A08
SPEC NO: DSAG5697
REV NO: V.1
DATE: JUN/17/2006
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Z.Z.YANG
ERP: 1202001295