T-1 (3mm) SOLID STATE LAMP Part Number : WP7104PBD/A PRELIMINARY SPEC BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description ●LOW POWER CONSUMPTION. The Blue source color devices are made with InGaN ●POPULAR T-1 DIAMETER PACKAGE. on SiC Light Emitting Diode. ●GENERAL PURPOSE LEADS. Static electricity and surge damage the LEDS. ●RELIABLE AND RUGGED. It is recommended to use a wrist band or ●LONG LIFE - SOLID STATE RELIABILITY. anti-electrostatic glove when handling the LEDs. ●AVAILABLE ON TAPE AND REEL. All devices, equipment and machinery must be electri- ●RoHS COMPLIANT. cally grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG1575 REV NO: V.4 DATE: OCT/18/2006 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1101013158 Selection Guide Dice Part No. WP7104PBD/A Iv (mcd) [2] @ 20mA Lens Type BLUE (InGaN) BLUE DIFFUSED Viewing Angle [1] Min. Typ. 2 θ 1/2 180 700 30° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V 1000 V Reverse Voltage Electrostatic Discharge Threshold (HBM) Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG1575 REV NO: V.4 DATE: OCT/18/2006 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1101013158 Blue WP7104PBD/A SPEC NO: DSAG1575 REV NO: V.4 DATE: OCT/18/2006 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1101013158 PACKING & LABEL SPECIFICATIONS WP7104PBD/A SPEC NO: DSAG1575 REV NO: V.4 DATE: OCT/18/2006 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1101013158